Mechanical Properties of Refined A356 Alloy in Response to Continuous Rheological Extruded Al-5Ti-0.6C-1.0Ce Alloy Prepared at Different Temperatures
Open Access
Abstract
The microstructure is an important factor determining the mechanical properties of A356 alloy. In this experiment, the refiner Al-5Ti-0.6C-1.0Ce master alloys under different preparation temperatures were prepared, and the A356 alloy was refined. The effects of preparation temperature on the number and morphological distribution of each phase in Al-Ti-C-Ce master alloy and the effects of Al-Ti-C-Ce master alloy at different preparation temperatures on the microstructure and mechanical properties of A356 alloy were explored successively. Results showed that, as preparation temperature increased from 850 to 1150 °C, TiAl3 changed from large blocks to long strips and a needle-like phase, and Ti2Al20Ce changed from a bright white block to a broken small block phase. Al-5Ti-0.6C-1.0Ce prepared at 1050 °C can significantly refine the α-Al of A356 alloy and modify eutectic Si. The α-Al grain size was refined from about 1540 to 179.7 μm, and the eutectic Si length was refined from about 22.3 to 17.8 μm with the transition from a coarse needle-like to a short rod-like structure. The ultimate tensile strength and elongation of A356 alloy changed non-monotonically, and the peak values were 282.216 MPa and 3.9% with the Al-Ti-C-Ce preparation temperature of 1050 °C and 950 °C, respectively.Keywords
Funding Information
- National Key Research and Development Program of China (2022YFE0137900, 2022YFB3706801, 2021RD06, U2241232, 2022JH2/101300003, 2022-BS-262)
- Dalian High-level Talents Innovation Support Program (2022YFE0137900, 2022YFB3706801, 2021RD06, U2241232, 2022JH2/101300003, 2022-BS-262)
- National Natural Science Foundation of China (2022YFE0137900, 2022YFB3706801, 2021RD06, U2241232, 2022JH2/101300003, 2022-BS-262)
- Applied Basic Research Program of Liaoning Province (2022YFE0137900, 2022YFB3706801, 2021RD06, U2241232, 2022JH2/101300003, 2022-BS-262)
- National Natural Science Foundation of Liaoning province (2022YFE0137900, 2022YFB3706801, 2021RD06, U2241232, 2022JH2/101300003, 2022-BS-262)
This publication has 40 references indexed in Scilit:
- Studies on the influence of grain refining and modification on microstructure and mechanical properties of forged A356 alloyMaterials Science and Engineering: A, 2011
- Effect of Nd on microstructure and wear resistance of hypereutectic Al–20%Si alloyJournal of Alloys and Compounds, 2010
- A united refinement technology for commercial pure Al by Al–10Ti and Al–Ti–C master alloysJournal of Alloys and Compounds, 2009
- Influence of zirconium on grain refining efficiency of Al–Ti–C master alloysJournal of Materials Science, 2007
- The performance of Al–Ti–C grain refiners in twin-roll casting of aluminium foilstockJournal of Alloys and Compounds, 2007
- Effect of La on Microstructure and Grain-Refining Performance of Al-Ti-C Grain RefinerJournal of Rare Earths, 2006
- Grain refining efficiency of Al–Ti–C alloysJournal of Alloys and Compounds, 2006
- Influence of high-intensity ultrasound on grain refining performance of Al–5Ti–1B master alloy on aluminiumMaterials Science and Engineering: A, 2005
- Fading mechanism of grain refinement of aluminum–silicon alloy with Al–Ti–B grain refinersMaterials Science and Engineering: A, 2003
- Influence of magnesium on grain refinement and ductility in a dilute Al–Sc alloyActa Materialia, 2001