Applicability of bed load transport models for mixed‐size sediments in steep streams considering macro‐roughness
Open Access
- 6 June 2015
- journal article
- research article
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 51 (7) , 5260-5283
Abstract
In steep mountain streams, macro‐roughness elements typically increase both flow energy dissipation and the threshold of motion compared to lower‐gradient channels, reducing the part of the flow energy available for bed load transport. Bed load transport models typically take account of these effects either by reducing the acting bed shear stress or by increasing the critical parameters for particle entrainment. Here we evaluate bed load transport models for mixed‐size sediments and models based on a median grain size using a large field data set of fractional bed load transport rates. We derive reference shear stresses and bed load transport relations based on both the total boundary shear stress and a reduced (or “effective”) shear stress that accounts for flow resistance due to macro‐roughness. When reference shear stresses are derived from the total boundary shear stress, they are closely related to channel slope, but when they are derived from the effective shear stress, they are almost invariant with channel slope. The performance of bed load transport models is generally comparable when using the total shear stress and a channel slope‐related reference shear stress, or when using the effective shear stress and a constant reference shear stress. However, dimensionless bed load transport relations are significantly steeper for the total stress approach, whereas they are similar to the commonly used fractional Wilcock and Crowe (WC) transport model for the effective stress approach. This similarity in the relations allows the WC model, developed for lower‐gradient streams, to be used in combination with an effective shear stress approach, in steep mountain streams.Keywords
Funding Information
- CCES project APUNCH of the ETH domain, and partly by SNF (200021_124634/1)
- Stream Systems Technology Center
- USDA Forest Service, Fort Collins, CO, USA
This publication has 76 references indexed in Scilit:
- Evaluation of bedload transport predictions using flow resistance equations to account for macro‐roughness in steep mountain streamsWater Resources Research, 2011
- Evaluation of flow resistance in gravel‐bed rivers through a large field data setWater Resources Research, 2011
- A comparison between flume and field bed load transport data and consequences for surface‐based bed load transport predictionWater Resources Research, 2010
- Analysis of bedload transport characteristics of Idaho streams and riversEarth Surface Processes and Landforms, 2008
- A Comparison of Coarse Bedload Transport Measured with Bedload Traps and Helley-Smith SamplersGeodinamica Acta, 2008
- Bedload transport in the instrumented catchment of the Rio CordonCATENA, 1999
- Grain and form resistance in gravel-bed rivers Résistances de grain et de forme dans les rivières à graviersJournal of Hydraulic Research, 1999
- Marginal bed load transport in a gravel bed stream, Sagehen Creek, CaliforniaWater Resources Research, 1994
- Critical discharge for entrainment of poorly sorted gravelEarth Surface Processes and Landforms, 1994
- An assessment of bed load sediment transport formulae for gravel bed riversWater Resources Research, 1989