Numerical investigation of laser powder bed fusion of glass
Open Access
- 1 June 2024
- journal article
- research article
- Published by Springer Nature in Glass Structures & Engineering
- Vol. 9 (2) , 185-200
Abstract
Additive manufacturing of glass using laser powder bed fusion has been recently developed, demonstrating its potential to be applied in small scale applications such as flow reactors for the chemical engineering and pharmaceutical manufacturing industries. While previous research demonstrated that complex 3-dimensional shapes can be manufactured, built parts are often brittle, exhibit high porosity and lack transparency. This study employs a transient, heat transfer finite element analysis to shed light on the thermal response of laser—glass powder bed interaction and the impact of processing parameters. Through this understanding, the research seeks to identify practical strategies that can be employed to improve the quality and properties of the built parts. Bulk solid and powder soda lime silica glass properties are used as input in the model, while the laser heat flux and scan strategy, conversion of powder feedstock to bulk solid glass and heat losses from convection and radiation effects are introduced in the model through Fortran coding. The study showed that effective powder consolidation, resulting in well-defined geometrical features, is achieved for temperatures near the glass melting point. Additionally, uniform consolidation depths and widths can be achieved by increasing laser power, elevating substrate temperature and reducing scan speed within certain limits, whilst ensuring hatch spacing is below the corresponding single scan track width for unidirectional adjacent laser trajectories.Keywords
This publication has 31 references indexed in Scilit:
- On the Modeling and Simulation of SLM and SLS for Metal and Polymer Powders: A ReviewArchives of Computational Methods in Engineering, 2021
- Laser powder bed fusion of soda lime silica glass: Optimisation of processing parameters and evaluation of part propertiesAdditive Manufacturing, 2021
- Finite element analysis of thermal behavior and experimental investigation of Ti6Al4V in selective laser meltingOptik, 2020
- Thermofluid field of molten pool and its effects during selective laser melting (SLM) of Inconel 718 alloyAdditive Manufacturing, 2018
- Principles of viscous sintering in amorphous powders: A critical reviewChemical Engineering Research and Design, 2017
- Numerical analysis of residual stress evolution of AlSi10Mg manufactured by selective laser meltingOptik, 2017
- 3D‐Printed Transparent GlassAdvanced Materials, 2017
- Understanding the effect of laser scan strategy on residual stress in selective laser melting through thermo-mechanical simulationAdditive Manufacturing, 2016
- Thermal and mechanical finite element modeling of laser forming from metal and ceramic powdersActa Materialia, 2004
- Optical properties of soda lime silica glassesSolar Energy Materials, 1985