Accelerated Corrosion Behavior of Steel in Concrete Subjected to Sustained Flexural Loading Using Electrochemical Methods and X-Ray Computed Tomography
Authors:
- 1 July 2018
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 30 (7)
Abstract
In this study, the effect of flexural loading on the chloride-induced corrosion behavior of steels in large-sized concrete was characterized using various electrochemical methods and X-ray computed tomography (X-CT). Electrochemical measurements revealed that steels embedded in loaded concrete exhibited higher corrosion rate than those in unloaded concrete after 15 days of accelerated corrosion. However, after accelerated corrosion for 60 days, similar corrosion behavior was identified for steels in both loaded concrete and unloaded concrete. It was found that the penetration and the distribution of corrosion products in concrete were significantly affected by the sustained flexural loading after the occurrence of load-induced transverse cracks.Keywords
This publication has 49 references indexed in Scilit:
- Welded, sandblasted, stainless steel corrugated bars in non-carbonated and carbonated mortars: A 9-year corrosion studyCorrosion Science, 2016
- Corrosion initiation in cracked fibre reinforced concrete: Influence of crack width, fibre type and loading conditionsCorrosion Science, 2015
- Propagation of corrosion in pre-cracked carbonated reinforced mortarMaterials and Structures, 2014
- Application of X-Ray CT to Study Diffusivity in Cracked Concrete Through the Observation of Tracer TransportJournal of Advanced Concrete Technology, 2013
- Characterization of steel corrosion in mortar by various electrochemical and physical techniquesCorrosion Science, 2013
- Probabilistic considerations on the effect of specimen size on the critical chloride content in reinforced concreteCorrosion Science, 2011
- Impact of mechanical loading on the corrosion of steel reinforcement in concrete structuresMaterials and Structures, 2010
- Monitoring of corrosion processes in chloride contaminated mortar by electrochemical measurements and X‐ray tomographyMaterials and Corrosion, 2010
- Application of X‐ray tomography for the verification of corrosion processes in chloride contaminated mortarMaterials and Corrosion, 2007
- Advances in Electrochemical Impedance Measurements in Reinforced ConcreteMaterials Science Forum, 1995