Investigation of the Influence of Opaque White Ink Addition on Colour Characteristics of Some Process and Pantone Colours Printed with Water-Based Flexo Inks on Kraft Papers
One of the major challenges in flexographic printing on kraft papers is the accurate reproduction of colour, which is strongly affected by the inherent yellow-brown shade of the printing substrate. Due to the limited opacity of most process and spot-colour inks, including CMYK and Pantone water-based flexographic inks, significant deviations in colour appearance occur when they are printed directly on kraft-based materials. The conventional technological solution is the application of one or more opaque white ink underlayers in order to create a sufficiently white printing base. However, this approach is associated with several disadvantages, including increased production costs, additional printing units or passes, the need for extra flexographic printing plates, higher ink consumption, and possible technical problems such as anilox roller clogging caused by the highly pigmented nature of opaque white inks. The present study investigates an alternative approach based on the addition of different quantities of opaque white ink directly into water-based flexographic process inks and Pantone inks. The influence of this modification on the colour characteristics and colour reproduction accuracy was evaluated by measuring the spectral properties and opacity of the white ink, as well as the CIE Lab* colour coordinates of the printed samples. Colour differences, expressed as ΔE values, were determined in relation to reference colour characteristics. The inks were printed on brown kraft liner and on white double-coated testliner. Comparative analyses were performed between inks printed on a white substrate and inks printed directly on kraft material with the addition of varying amounts of opaque white ink. The results demonstrate a significant improvement in the colour accuracy characteristics of inks printed on brown kraft paper when opaque white ink is added to the ink formulation. Depending on the investigated ink colour, the colour difference from the reference values was reduced by approximately 30–40%. These findings indicate that controlled addition of opaque white ink may represent an effective technological approach for improving colour reproduction accuracy in flexographic printing on kraft-based substrates. The results are of both scientific and practical importance and are particularly relevant to high-volume printing of corrugated board and packaging production, where kraft papers are widely used and colour consistency remains a critical quality requirement.