Assessment of the Effect of Al2O3 and TiO2 Nanoparticles on Orange Peel Biomass and its Application for Cd (II) and Ni (II) Uptake
- 1 January 2019
- journal article
- research article
- Published by American Society of Agricultural and Biological Engineers (ASABE) in Transactions of the ASABE
- Vol. 62 (1) , 139-147
Abstract
: In recent years, nanotechnology has been used to synthesize novel materials with several applications, such as wastewater treatment, medicine, and packaging. In this study, titanium dioxide (TiO2) and alumina (Al2O3) nanoparticles were synthesized and used to modify orange peel (OP) biomass. The resulting materials (OP-TiO2 and OP-Al2O3) were applied as biosorbents for removing nickel and cadmium from an aqueous solution. FT-IR, SEM-EDS, and XRD analyses were carried out to determine functional groups of biomass, morphology and elemental composition of the biosorbent, and average particle size, respectively. The presence of hydroxyl, carboxyl, and amine groups in the biomass spectra contributed to the adsorption process. Successful synthesis of the biosorbents due to the presence of aluminum and titanium elements was confirmed by energy dispersive x-ray spectroscopy (EDS). The average particle size was calculated as 19.13 ±4.1 nm and 58.56 ±12.64 nm for TiO2 and Al2O3, respectively. The solution pH significantly affected the adsorption process, and pH of 4 to 6 was selected as a suitable range. The highest removal yields of 87.85% and 95.6% were achieved using OP-Al2O3 for nickel and cadmium uptake, respectively. These results revealed an improvement in adsorption properties after loading the orange peel biomass with nanoparticles. Keywords: Biosorbent, Heavy metals, Nanomaterials, Wastewater treatment.Keywords
Funding Information
- University of Cartagena (Acta No. 106-2017)
This publication has 34 references indexed in Scilit:
- Adsorptive removal of cadmium from aqueous solution by cork biomass: Equilibrium, dynamic and thermodynamic studiesArabian Journal of Chemistry, 2016
- Green synthesis of TiO2 nanoparticles by using aqueous extract of Jatropha curcas L. latexMaterials Letters, 2012
- Cadmium removal and recovery from aqueous solutions by novel adsorbents prepared from orange peel and Fe2O3 nanoparticlesChemical Engineering Journal, 2012
- Effective removal of heavy metals from aqueous solutions by orange peel xanthateTransactions of Nonferrous Metals Society of China, 2010
- Adsorptive removal of cobalt from aqueous solution by utilizing lemon peel as biosorbentBiochemical Engineering Journal, 2010
- Removal of cadmium (II) from aqueous solutions by adsorption on agricultural waste biomassJournal of Hazardous Materials, 2008
- Titanium dioxide nanoparticles prepared by laser pyrolysis: Synthesis and photocatalytic propertiesApplied Surface Science, 2007
- Low temperature synthesis of ultrafine α-Al2O3 powder by a simple aqueous sol–gel processCeramics International, 2006
- Adsorption of copper from aqueous solution on Brassica cumpestris (mustard oil cake)Journal of Hazardous Materials, 2005
- Removal of cadmium and nickel from wastewater using bagasse fly ash—a sugar industry wasteWater Research, 2003