Preparation of graphene oxide/epoxy nanocomposites with significantly improved mechanical properties
- 5 August 2014
- journal article
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 116 (5)
Abstract
The effect of graphene oxide (GO) on the mechanical properties and the curing reaction of Diglycidyl Ether of Bisphenol A/F and Triethylenetetramine epoxy system was investigated. GO was prepared by oxidation of graphite flakes and characterized by spectroscopic and microscopic techniques. Epoxy nanocomposites were fabricated with different GO loading by solution mixing technique. It was found that incorporation of small amount of GO into the epoxy matrix significantly enhanced the mechanical properties of the epoxy. In particular, model I fracture toughness was increased by nearly 50% with the addition of 0.1 wt. % GO to epoxy. The toughening mechanism was understood by fractography analysis of the tested samples. The more irregular, coarse, and multi-plane fracture surfaces of the epoxy/GO nanocomposites were observed. This implies that the two-dimensional GO sheets effectively disturbed and deflected the crack propagation. At 0.5 wt. % GO, elastic modulus was ∼35% greater than neat epoxy. Differential scanning calorimetry (DSC) results showed that GO addition moderately affect the glass transition temperature (Tg) of epoxy. The maximum decrease of Tg by ∼7 °C was shown for the nanocomposite with 0.5 wt. % GO. DSC results further revealed that GO significantly hindered the cure reaction in the epoxy system.Keywords
This publication has 45 references indexed in Scilit:
- Atomistic Simulation of Interfacial Behaviour in Graphene-Polymer NanocompositeScience of Advanced Materials, 2014
- The effect of graphene dispersion on the mechanical properties of graphene/epoxy compositesCarbon, 2013
- Improved dispersion and interface in the graphene/epoxy composites via a facile surfactant-assisted processComposites Science and Technology, 2013
- Significantly modified tribological performance of epoxy nanocomposites at very low graphene oxide contentPolymer, 2013
- Tailoring the characteristics of graphite oxide nanosheets for the production of high-performance poly(vinyl alcohol) compositesCarbon, 2012
- High‐Performance Pristine Graphene/Epoxy Composites With Enhanced Mechanical and Electrical PropertiesMacromolecular Materials and Engineering, 2012
- Mechanical Behavior of Epoxy-Graphene Platelets NanocompositesJournal of Engineering Materials and Technology, 2012
- Fracture and Fatigue in Graphene NanocompositesSmall, 2010
- Enhanced Mechanical Properties of Nanocomposites at Low Graphene ContentACS Nano, 2009
- Convenient preparation of tunably loaded chemically converted graphene oxide/epoxy resin nanocomposites from graphene oxide sheets through two-phase extractionJournal of Materials Chemistry, 2009