Effects of Multi-Walled Carbon Nanotube (MWCNT) Content on Physical Properties and Cell Structure in Ethylene Vinyl Acetate Copolymer (EVA)/MWCNT Nanocomposite Foams
Authors:
- 25 March 2013
- journal article
- research article
- Published by Taylor & Francis in Polymer-Plastics Technology and Engineering
- Vol. 52 (7) , 699-703
Abstract
Melt compounding is used to mix ethylene-vinyl acetate copolymer (EVA) and multi-walled carbon nanotube (MWCNT). Then the obtained EVA/MWCNT mixtures were foamed using a chemical blowing agent. Without any modification of MWCNT, a significant improvement of the tensile properties was observed for the EVA/MWCNT foams. With increasing the MWCNT content to 10 phr, the average cell size decreases to 36 µm due to the higher melt viscosity and the average cell density increases to 10.5 × 106 cell/cm3 due the heterogeneous nucleation. To investigate the possible applications for static dissipative purpose, the surface resistivity of EVA/MWCNT foams was also investigated.Keywords
This publication has 20 references indexed in Scilit:
- Polypyrrole/Carbon Nanotube and Polyaniline/Carbon Nanotube Nanocomposites: Synthesis and CharacterizationPolymer-Plastics Technology and Engineering, 2012
- Rheological Study of Vegetable Oil Based Hyperbranched Polyurethane/Multi-Walled Carbon Nanotube NanocompositesPolymer-Plastics Technology and Engineering, 2011
- The Effect of Carbon Black/Multiwall Carbon Nanotube Hybrid Fillers on the Properties of Natural Rubber NanocompositesPolymer-Plastics Technology and Engineering, 2011
- Multiwall Carbon Nanotube-Filled Natural Rubber: The Effects of Filler Loading and Mixing MethodPolymer-Plastics Technology and Engineering, 2010
- Effects of nanoparticles on the density reduction and cell morphology of extruded metallocene polyethylene/wood fiber nanocompositesJournal of Applied Polymer Science, 2007
- Effects of clay dispersion on the foam morphology of LDPE/clay nanocompositesJournal of Applied Polymer Science, 2006
- Synthesis of polystyrene–carbon nanofibers nanocomposite foamsPolymer, 2005
- Reinforcement of elastomeric polypropylene by nanoclay fillersPolymer International, 2004
- Extrusion of polystyrene nanocomposite foams with supercritical CO2Polymer Engineering & Science, 2003
- Well‐Controlled Biodegradable Nanocomposite Foams: From Microcellular to NanocellularMacromolecular Rapid Communications, 2003