Fluid Cavitation Intensity in Zero Leakage Upstream Pumping Face Seals with Spiral Grooves
Authors:
- 25 September 2023
- journal article
- research article
- Published by World Scientific Pub Co Pte Ltd in International Journal of Applied Mechanics
- Vol. 15 (10)
Abstract
Cavitation intensity variations in fluid lubrication may alter the mechanical and lubrication properties of the fluid. In this paper, a compressible cavitation model is presented to study the effect of fluid cavitation intensity on zero-leakage flow of upstream-pumping spiral grooves face seals (UPSGLFS). The pressure variation in cavities can be calculated considering the compressibility of the lubricating medium, the ratio of minimum pressure to cavitation pressure is further defined to characterize the cavitation intensity. A numerical analysis of the zero-leakage behavior of UPSGLFS is then performed based on its effect. Results show that cavitation plays a negative role in sealing performances. However, the groove’s configuration and working conditions have substantial effects on controlling the cavitation intensity. Meanwhile, whether a circumferential continuous pressure ring above the seal pressure can be formed is the design basis for judging the strict zero leakage of the medium, rather than only depending on the change of leakage rate parameter value. With suitable spiral groove parameter design, zero-leakage design for upstream-pumping seals may be achieved under multi-speed and multi-seal-pressure conditions. Here, a zero-leakage map is presented for working conditions with multi-speed ranging from 500 to 20,000[ ]rpm and multi-seal pressure ranging from 0.1 to 3.0[ ]MPa.Keywords
Funding Information
- National Natural Science Foundation of China (51775504)
This publication has 32 references indexed in Scilit:
- The effect of lubricant inertia on fluid cavitation for high-speed squeeze film dampersJournal of Vibroengineering, 2017
- A General Model for Liquid and Gas Lubrication, Including CavitationJournal of Tribology, 2017
- Experimental Study on Transient Behavior of Cavitation Phenomenon in Textured Thrust BearingsTribology Letters, 2016
- INTERACTIONS BY EXCHANGE OF VOLUME BETWEEN TWO SPHERICAL BUBBLESInternational Journal of Applied Mechanics, 2014
- Direct Observation of Cavitation Phenomenon and Hydrodynamic Lubrication Analysis of Textured SurfacesTribology Letters, 2012
- Gas Lubrication Analysis Method of Step-Dimpled Face Mechanical SealsJournal of Tribology, 2012
- Cavitation formation and modelling for fluid film bearings: A reviewProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2010
- On the Prediction of Cavitation in Dimples Using a Mass-Conservative AlgorithmJournal of Tribology, 2009
- Experiments and Modeling of Zero Leakage Backward Pumping Mechanical Face SealsTribology Transactions, 2008
- Reverse Flow as a Possible Mechanism for Cavitation Pressure Build-up in a Submerged Journal BearingJournal of Tribology, 2001