An Improved Model of the Heat Pipe Based on the Network Method Applied on a Heat Pipe Cooled Reactor
Authors:
Open Access
- 5 May 2022
- journal article
- research article
- Published by Frontiers Media SA in Frontiers in Energy Research
- Vol. 10
Abstract
As the unique piece of heat transport equipment in a heat pipe cooled reactor, an accurate simulation of the heat pipe is helpful for understanding the real behavior of the reactor core and the reactor system. Based on the network method, an improved model for the heat pipe which considers the heat conductance in the wall, the vapor flow in the vapor space, and the liquid flow in the wick is proposed. Meanwhile, the gravity term is also added to the flow equation. Compared with the experimental results of a copper-water heat pipe, the validity of this model is verified. Then, a high-temperature sodium heat pipe of 1.0 m length is selected as the study object. Based on the analysis, it can be found that the total temperature difference of the heat pipe is 31.7 K, and the temperature drop caused by the vapor flow is only 2.6 K. As for the flow pressure drop in the heat pipe, the pressure drop is mainly concentrated in the wick region, which is 8,422.47 Pa, and the pressure drop in the vapor space is only 896.68 Pa. In cases of non-uniform heating and cooling, high heat leakage, and inclined operation, results indicate that the greater the non-uniformity of heating or cooling, the greater will be the temperature drop of the heat pipe. With the increase of heat leakage, the operating temperature of the heat pipe decreases significantly, and the total temperature drop increases. The heat pipe can operate at all positive inclination angles, but when the inclination angle exceeds, the heat pipe will reach the capillary limit, and it may be damaged. All of these results can provide support for the design and simulation of a heat pipe cooled reactor.
Keywords
Funding Information
- National Key Research and Development Program of China (2020YFB1901700)
- Science Challenge Project (TZ2018001)
- National Natural Science Foundation of China (11775126 11775127)
This publication has 27 references indexed in Scilit:
- Experimental investigation and CFD analysis of a air cooled condenser heat pipeThermal Science, 2011
- Prediction of Thermal Contact Conductance in Vacuum Using Monte Carlo SimulationJournal of Thermophysics and Heat Transfer, 2001
- A network thermodynamic analysis of the heat pipeInternational Journal of Heat and Mass Transfer, 1998
- A vapor flow model for analysis of liquid-metal heat pipe startup from a frozen stateInternational Journal of Heat and Mass Transfer, 1996
- Analysis of the critical Weber number at the onset of liquid entrainment in capillary-driven heat pipesInternational Journal of Heat and Mass Transfer, 1995
- A heat pipe transient analysis modelInternational Journal of Heat and Mass Transfer, 1994
- A Numerical Analysis of High-Temperature Heat Pipe Startup From the Frozen StateJournal of Heat Transfer, 1993
- TRANSIENT TWO-DIMENSIONAL COMPRESSIBLE ANALYSIS FOR HIGH-TEMPERATURE HEAT PIPES WITH PULSED HEAT INPUTNumerical Heat Transfer, Part A: Applications, 1991
- The Sonic Limit in Sodium Heat PipesJournal of Heat Transfer, 1973
- Theory of the ultimate heat transfer limit of cylindrical heat pipesInternational Journal of Heat and Mass Transfer, 1973