Optimisation of Trailing Edge Flaps on the Base Cavity of a Vehicle for Improved Performance at Yaw
Open Access
- 7 June 2022
- journal article
- research article
- Published by Springer Nature in Flow, Turbulence and Combustion
- Vol. 109 (2) , 309-326
Abstract
Regulations to reduce greenhouse gas emissions of passenger vehicles are becoming increasingly stringent. The aerodynamic drag is a major contributor to the vehicle’s total energy consumption where a large portion is attributed to the base wake. This paper optimises the angles of small trailing edge flaps on a base cavity of a full-scale sports utility vehicle placed in a wind tunnel. The trailing edge flaps are controlled using servos mounted inside the cavity. The flap angles are optimised using a surrogate model based optimisation algorithm with the objective of reducing the aerodynamic drag at different yaw angles and to create a yaw-insensitive geometry by considering several weighted yaw angles to form the driving cycle averaged drag. Low drag designs are further investigated using base pressures and wake measurements. The results show that the base pressures are symmetrised by reducing the crossflow in the wake. As the model is yawed the wake becomes increasingly downwash dominated by a large rotating windward structure which is reduced by the optimised flaps. The cycle averaged drag optimised design has a smaller increase in drag when yawed compared to a design optimised without considering yaw.Keywords
Funding Information
- Energimyndigheten (P43328-1)
- Chalmers University of Technology
This publication has 35 references indexed in Scilit:
- Aerodynamic performances of rounded fastback vehicleProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2017
- Influence of short rear end tapers on the wake of a simplified square-back vehicle: wake topology and rear dragExperiments in Fluids, 2016
- CO2 emissions and energy demands of vehicles tested under the NEDC and the new WLTP type approval test proceduresApplied Energy, 2016
- Fluid force and symmetry breaking modes of a 3D bluff body with a base cavityJournal of Fluids and Structures, 2016
- Aerodynamic Drag of Passenger Cars at YawSAE International Journal of Passenger Cars - Mechanical Systems, 2015
- Effect of the traversing unit on the flow structures behind a passenger vehicle2014
- Real world drag coefficient – is it wind averaged drag?2014
- An Assessment of Detached-Eddy Simulations of Unsteady Crosswind Aerodynamics of Road VehiclesFlow, Turbulence and Combustion, 2011
- Formulation of the Optimal Latin Hypercube Design of Experiments Using a Permutation Genetic Algorithm2004
- Some Salient Features Of The Time-Averaged Ground Vehicle WakeSAE International Journal of Advances and Current Practices in Mobility, 1984