Acoustic mapping velocimetry
Open Access
- 5 May 2016
- journal article
- research article
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 52 (5) , 4132-4150
Abstract
Knowledge of sediment dynamics in rivers is of great importance for various practical purposes. Despite its high relevance in riverine environment processes, the monitoring of sediment rates remains a major and challenging task for both suspended and bed load estimation. While the measurement of suspended load is currently an active area of testing with nonintrusive technologies (optical and acoustic), bed load measurement does not mark a similar progress. This paper describes an innovative combination of measurement techniques and analysis protocols that establishes the proof‐of‐concept for a promising technique, labeled herein Acoustic Mapping Velocimetry (AMV). The technique estimates bed load rates in rivers developing bed forms using a nonintrusive measurements approach. The raw information for AMV is collected with acoustic multibeam technology that in turn provides maps of the bathymetry over longitudinal swaths. As long as the acoustic maps can be acquired relatively quickly and the repetition rate for the mapping is commensurate with the movement of the bed forms, successive acoustic maps capture the progression of the bed form movement. Two‐dimensional velocity maps associated with the bed form migration are obtained by implementing algorithms typically used in particle image velocimetry to acoustic maps converted in gray‐level images. Furthermore, use of the obtained acoustic and velocity maps in conjunction with analytical formulations (e.g., Exner equation) enables estimation of multidirectional bed load rates over the whole imaged area. This paper presents a validation study of the AMV technique using a set of laboratory experiments.Keywords
Funding Information
- The first and fourth authors (11-TI-C06)
This publication has 32 references indexed in Scilit:
- Estimation of Suspended Sediment Concentrations with Adcp in Danube RiverJournal of Hydrology and Hydromechanics, 2013
- Complementary experiments for hydraulic modeling of multi-box culvertsCanadian Journal of Civil Engineering, 2013
- Sediment self-cleaning multi-box culvertsJournal of Hydraulic Research, 2013
- New imaging technique for measuring fluid and solid velocities in sand-laden flows over dunes in an open channel2007
- Bedform movement recorded by sequential single-beam surveys in tidal riversJournal of Hydrology, 2002
- Wave‐formed sand ripples at Duck, North CarolinaJournal of Geophysical Research: Oceans, 2001
- Dune Growth, Decay and Migration Rates during a Large‐Magnitude Flood at a Sand and Mixed Sand–Gravel Bed in the Dutch Rhine River System1999
- Large-scale particle image velocimetry for flow analysis in hydraulic engineering applicationsJournal of Hydraulic Research, 1998
- Particle-Imaging Techniques for Experimental Fluid MechanicsAnnual Review of Fluid Mechanics, 1991
- Bedforms, bed material, and bedload transport in a salt-wedge estuary: Fraser River, British ColumbiaCanadian Journal of Earth Sciences, 1989