Electrochemical Behavior of TiCN–Ni‐Based Cermets
Authors:
- 13 December 2006
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 90 (1) , 205-210
Abstract
The electrochemical behavior of TiCN–20 wt% Ni cermets containing different secondary carbides (10 wt% WC, NbC, TaC, and HfC) was investigated in freely aerated 0.2 mol/L sulfuric acid. A comparison has also been made with polarization behavior of pure Ni. All the materials (except HfC‐containing cermet) exhibited active–passive polarization behavior, characterized by two passive regions. The first passive region, obtained on polarizing past the zero current potential, was attributed to passive film formation due to TiCN, while the second passive film is presumably due to the presence of a Ni binder phase. The passivation behavior in the case of cermets containing various secondary carbides (WC, TaC, and NbC) was similar to baseline TiCN–20Ni cermets, while poor passivation behavior was observed in the case of TiCN–20Ni–10HfC. Efforts have been made to correlate the passivation behavior with the microstructural characteristics of sintered cermets.Keywords
This publication has 20 references indexed in Scilit:
- Effect of WC and group IV carbides on the cutting performance of Ti(C,N) cermet toolsInternational Journal of Machine Tools and Manufacture, 2004
- Effect of various carbides on the dissolution behavior of Ti(C0.7N0.3) in a Ti(C0.7N0.3)–30Ni systemInternational Journal of Refractory Metals and Hard Materials, 2001
- Surface damage on cemented carbide rock-drill buttonsWear, 2001
- Effect of HfC addition on microstructure of Ti(CN)–Ni cermet systemPowder Metallurgy, 1999
- A study on microstructural changes in Ti(CN)–NbC–Ni cermetsMaterials Science and Engineering: A, 1998
- The relationship between electrochemical behaviour and in-service corrosion of WC based cemented carbidesInternational Journal of Refractory Metals and Hard Materials, 1997
- Electrochemical behaviour of tungsten-carbide hardmetalsMaterials Science and Engineering: A, 1996
- Ti(C,N) cermets — Metallurgy and propertiesInternational Journal of Refractory Metals and Hard Materials, 1995
- Titanium carbonitride-based cermets: processes and propertiesMaterials Science and Engineering: A, 1993
- Anodic polarization and corrosion of cemented carbides with cobalt and nickel bindersJournal of Materials Science, 1988