Multimode Rayleigh wave profiling by hybrid surface and borehole methods
Open Access
- 22 March 2014
- journal article
- research article
- Published by Oxford University Press (OUP) in Geophysical Journal International
- Vol. 197 (2) , 1184-1195
Abstract
To improve the accuracy of shallow seismic shear wave velocity profiling, we propose a minimally invasive hybrid surface-and-borehole method that enhances the detection of higher modes of Rayleigh wave dispersion data. The new method combines techniques from the multichannel analysis of surface waves and multichannel simulation with one receiver (MSOR) methods to record components of Rayleigh wave motion at the surface as well as at shallow depths within the soil mass. The performance of the proposed method is demonstrated through computational and experimental studies. We show that individual modes of Rayleigh waves can exhibit different dominant depths at which their motion is most significant. This is demonstrated through a numerical study of eigenvectors of layered soil profiles via the stiffness matrix method, and confirmed by a finite element simulation of the apparent dispersion trends recorded at shallow depths using MSOR. Upon superimposing dispersion data recorded via the receivers at various depths, the resulting multimode dispersion data is used in a multi-objective inverse analysis, for which the difference between experimental and theoretical dispersive phase-velocity spectra are minimized for multiple modes simultaneously. In the numerical study, we demonstrate that the resulting inverted profiles and theoretical dispersion data have improved accuracy relative to single-mode inversion. Preliminary field tests are performed using the new hybrid method, and the results are shown to support the conclusions of the numerical study and confirm the feasibility of the proposed technique. Although the use of multiple modes in surface wave testing is not new, the proposed hybrid method can provide more accurate and complete multimodal dispersion data than achieved with surface-only Rayleigh wave methods. As a result, errors because of misidentification or partial measurement of higher modes may be minimized, thus reducing statistical uncertainty in the inverted profiles.Keywords
This publication has 25 references indexed in Scilit:
- Seismic characterization of shallow bedrock sites with multimodal Monte Carlo inversion of surface wave dataSoil Dynamics and Earthquake Engineering, 2011
- Shear‐Wave Velocity Profiling of Strong Motion Sites that Recorded the 2001 Nisqually, Washington, EarthquakeEarthquake Spectra, 2011
- Estimation of shallow subsurface shear-wave velocity by inverting fundamental and higher-mode Rayleigh wavesSoil Dynamics and Earthquake Engineering, 2007
- Improved parameterization to invert Rayleigh-wave data for shallow profiles containing stiff inclusionsGeophysics, 2006
- Fast simulated annealing inversion of surface waves on pavement using phase-velocity spectraGeophysics, 2006
- Inversion of high frequency surface waves with fundamental and higher modesJournal of Applied Geophysics, 2003
- Faster, Better: Shear-Wave Velocity to 100 Meters Depth from Refraction Microtremor ArraysBulletin of the Seismological Society of America, 2001
- Effects of Multiple Modes on Rayleigh Wave Dispersion CharacteristicsJournal of Geotechnical Engineering, 1992
- Numerical simulation of the SASW testSoil Dynamics and Earthquake Engineering, 1992
- IN SITU MEASUREMENTS OF SHEAR‐WAVE VELOCITY IN SEDIMENTS WITH HIGHER‐MODE RAYLEIGH WAVES*Geophysical Prospecting, 1987