New Avenue of Achieving Ductility for Reinforced Concrete Members
Author:
- 1 September 2006
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 132 (9) , 1502-1506
Abstract
The flexural deformation of structural members is due to their curvature. For reinforced concrete (RC) members, this curvature depends on the tensile strain of the reinforcement and the compressive strain of the concrete. As concrete is a brittle material with little ductility, RC members achieve ductility and adequate deformation capacity mainly through the tensile straining or yielding of the reinforcement. When the tensile straining of the reinforcement is limited, such as in the case of over-reinforced RC beams and RC columns with large axial loads, whereby the tensile reinforcement does not yield and the member fails due to concrete crushing, the ductility of the member is limited. The application of high-strength steel or fiber reinforced polymer reinforcement significantly reduces the ductility of the tensile reinforcement, which results in a substantial reduction in the ductility of the structural member. Existing methods for improving the ductility of concrete structures with nonductile reinforce...Keywords
This publication has 4 references indexed in Scilit:
- FRP REINFORCEMENTS IN STRUCTURAL CONCRETE: ASSESSMENT, PROGRESS AND PROSPECTS2003
- PARTIAL-INTERACTION ANALYSIS OF COMPOSITE BEAM/COLUMN MEMBERS*Mechanics of Structures and Machines, 2002
- Seismic Performance of High-Strength Concrete ColumnsJournal of Structural Engineering, 1998
- Seismic Design of Reinforced Concrete and Masonry Buildings1992