A 16.5–28 GHz 0.18-$\mu$m BiCMOS Power Amplifier With Flat $19.4 \pm 1.2$ dBm Output Power
Authors:
- 11 December 2013
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Components Letters
- Vol. 24 (2) , 108-110
Abstract
A broadband fully integrated power amplifier (PA) with 3 dB bandwidth from 16.5 to 28 GHz was designed using a 0.18 μm SiGe BiCMOS process. The PA consists of a drive amplifier and two parallel main amplifiers. Lumped-element Wilkinson power divider and combiner are especially used to combine the main amplifiers as well as to provide suppression for the harmonics through their inherent low-pass filtering characteristic. The PA exhibits measured gain of more than 34.5 dB and very flat output power of 19.4±1.2 dBm across 16.5-28 GHz, and power added efficiency (PAE) higher than 20% and 17% between 16-24.5 GHz and up to 28 GHz, respectively. Specifically at 24 GHz, it achieves 19.4 dBm output power, 22.3% PAE, and 37.6 dB gain.Keywords
This publication has 5 references indexed in Scilit:
- Highly efficient 24-GHz CMOS linear power amplifier with an adaptive bias circuit2012
- A 24 GHz CMOS power amplifier using reversed body bias technique to improve linearity and power added efficiency2012
- A K-Band High-Voltage Four-Way Series-Bias Cascode Power Amplifier in 0.13 $\mu$ m CMOSIEEE Microwave and Wireless Components Letters, 2010
- A 22.5-dB gain, 20.1-dBm output power K-band power amplifier in 0.18-µm CMOS2010
- A 24-GHz, +14.5-dBm fully integrated power amplifier in 0.18-/spl mu/m CMOSIEEE Journal of Solid-State Circuits, 2005