Using an Atmospheric Pressure Chemical Vapor Deposition Process for the Development of V2O5 as an Electrochromic Material
Open Access
Abstract
Vanadium pentoxide coatings were grown by atmospheric pressure chemical vapor deposition varying the gas precursor ratio (vanadium (IV) chloride:water) and the substrate temperature. All samples were characterized by X-ray diffraction, Raman spectroscopy, scanning electron microscopy, cyclic voltammetry, and transmittance measurements. The water flow rate was found to affect the crystallinity and the morphological characteristics of vanadium pentoxide. Dense stacks of long grains of crystalline oxide are formed at the highest amount of water utilized for a substrate temperature of 450 °C. Accordingly, it was indicated that for higher temperatures and a constant gas precursor ratio of 1:7, the surface morphology becomes flattened, and columnar grains of uniform size and shape are indicated, keeping the high crystalline quality of the material. Hence, it was possible to define a frame of operating parameters wherein single-phase vanadium pentoxide may be reliably expected, including a gas precursor ratio of 1:7 with a substrate temperature of >450 °C. The as-grown vanadium pentoxide at 550 °C for a gas precursor ratio of 1:7 presented the best electrochemical performance, including a diffusion coefficient of 9.19 × 10−11 cm2·s−1, a charge density of 3.1 mC·cm−2, and a coloration efficiency of 336 cm2·C−1. One may then say that this route can be important for the growth of large-scale electrodes with good performance for electrochromic devices.Keywords
This publication has 43 references indexed in Scilit:
- Electrodeposition of V2O5 on TiO2 nanorod arrays and their electrochromic propertiesRSC Advances, 2016
- Novel morphology changes from 3D ordered macroporous structure to V2O5 nanofiber grassland and its application in electrochromismScientific Reports, 2015
- Perspectives of energy materials grown by APCVDSolar Energy Materials and Solar Cells, 2015
- Enhanced Electrochromism in Gyroid‐Structured Vanadium PentoxideAdvanced Materials, 2012
- Electrochromic properties of anodically grown mixed V2O5–TiO2 nanotubesElectrochemistry Communications, 2011
- Improved electrochromic performance in inverse opal vanadium oxide filmsJournal of Materials Chemistry, 2010
- Centimeter‐Long V2O5 Nanowires: From Synthesis to Field‐Emission, Electrochemical, Electrical Transport, and Photoconductive PropertiesAdvanced Materials, 2010
- Layered vanadium and molybdenum oxides: batteries and electrochromicsJournal of Materials Chemistry, 2009
- Roll-to-roll pulsed dc magnetron sputtering deposition of WO3 for electrochromic windowsElectrochimica Acta, 2001
- Electrochromic vanadium–pentoxide–based films: Structural, electrochemical, and optical propertiesJournal of Applied Physics, 1995