Transient Behavior of Glow Plugs in Direct-Injection Natural Gas Engines
Authors:
- 18 July 2012
- journal article
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 134 (9) , 092802
Abstract
Glow plugs are a possible ignition source for direct injected natural gas engines. This ignition assistance application is much different than the cold start assist function for which most glow plugs have been designed. In the cold start application, the glow plug is simply heating the air in the cylinder. In the cycle-by-cycle ignition assist application, the glow plug needs to achieve high surface temperatures at specific times in the engine cycle to provide a localized source of ignition. Whereas a simple lumped heat capacitance model is a satisfactory representation of the glow plug for the air heating situation, a much more complex situation exists for hot surface ignition. Simple measurements and theoretical analysis show that the thickness of the heat penetration layer is small within the time scale of the ignition preparation period (1–2 ms). The experiments and analysis were used to develop a discretized representation of the glow plug domain. A simplified heat transfer model, incorporating both convection and radiation losses, was developed for the discretized representation to compute heat transfer to and from the surrounding gas. A scheme for coupling the glow plug model to the surrounding gas computational domain in the KIVA-3V engine simulation code was also developed. The glow plug model successfully simulates the natural gas ignition process for a direct-injection natural gas engine. As well, it can provide detailed information on the local glow plug surface temperature distribution, which can aid in the design of more reliable glow plugs.Keywords
This publication has 13 references indexed in Scilit:
- Flame Propagation in Natural Gas Fueled Direct Injection Engines2010
- Characteristics of CNG Direct Injection with Auto-IgnitionSAE International Journal of Advances and Current Practices in Mobility, 2005
- Direct Induction Natural Gas (DING): A Diesel-Derived Combustion System for Low Emissions and High Fuel EconomySAE International Journal of Advances and Current Practices in Mobility, 2000
- A Database of Normal Spectral Emissivities of Metals at High TemperaturesInternational Journal of Thermophysics, 1999
- Modeling the Effect of Natural Gas Composition on Ignition Delay Under Compression Ignition ConditionsSAE International Journal of Advances and Current Practices in Mobility, 1997
- The Influence of Natural Gas Composition on Ignition in a Direct Injection Gas Engine Using Hot Surface Assisted Compression IgnitionSAE International Journal of Advances and Current Practices in Mobility, 1996
- Hot Surface Assisted Compression Ignition of Natural Gas in a Direct Injection Diesel EngineSAE International Journal of Advances and Current Practices in Mobility, 1996
- Bluff-Body Stabilized Glow Plug Ignition of a Methanol-Fueled IDI Diesel EngineSAE International Journal of Advances and Current Practices in Mobility, 1993
- Performance and Emission Characteristics of the Deutz Glow Plug Assisted Heavy-Duty Methanol EngineSAE International Journal of Advances and Current Practices in Mobility, 1987
- A Neat Methanol Direct Injection Combustion System for Heavy-Duty ApplicationsSAE International Journal of Advances and Current Practices in Mobility, 1986