Magnesium Matrix Composite with Open-Celled Glassy Carbon Foam Obtained Using the Infiltration Method
Open Access
Abstract
In this study, we present a new composite material that was developed using the pressure infiltration method. In this composite, carbon reinforcement in the form of an open-celled rectangular foam (Cof) was applied, and pure magnesium with two commercial magnesium cast alloys (AZ31, RZ5) was used as the matrix. We examined the microstructure (LM, SEM + EDS) of composites as well as the density, porosity, hardness, compressive strength, flexural strength and tribological properties in dry conditions. It was revealed that the chemical composition of the matrix had a significant impact on the macrostructure, microstructure and properties of the composite. The matrix with rare elements (RZ5) induced poor infiltration of Cof and physicochemical degradation of the reinforcement, while pure magnesium ensured good infiltration, a stable friction coefficient and low wear. For the AZ31 alloy, the effects of infiltration were good; however, an increase in the tribological properties was not observed. Compared with the as-cast matrix materials, the presence of carbon foam in both pure Mg and AZ31 alloy induced an increase in compressive strength and stiffness as well as a decrease in flexural strength. Furthermore, SEM examination of the fractured and wear surfaces microstructure showed structural effects’ dependence on the matrix composition.Keywords
This publication has 30 references indexed in Scilit:
- Microstructure of Magnesium Alloy ZRE1 Glassy Carbon Composite InterfaceSolid State Phenomena, 2013
- Bonding and Integration of Titanium to Graphitic Foams for Thermal Management ApplicationsInternational Journal of Applied Ceramic Technology, 2012
- Biodegradable polylactide/hydroxyapatite nanocomposite foam scaffolds for bone tissue engineering applicationsJournal of Materials Science: Materials in Medicine, 2012
- Enhanced compressive response of hybrid Mg–CNT nano-compositesJournal of Materials Science, 2011
- Effect of Glassy Carbon Particles on Wear Resistance of AZ91E Matrix CompositeSolid State Phenomena, 2011
- Microstructure and Physical Properties of AlMg/Al2O3 Interpenetrating Composites Fabricated by Metal Infiltration into Ceramic FoamsArchives of Metallurgy and Materials, 2011
- Microstructural Characteristics of an AZ91 Matrix‐Glassy Carbon Particle CompositeAdvanced Engineering Materials, 2010
- Mechanical Properties of Csf/AZ91D Composites Fabricated by Extrusion Forming Process Directly Following the Vacuum InfiltrationAdvanced Materials Research, 2010
- Fabrication process of carbon nanotube/light metal matrix composites by squeeze castingMaterials Science and Engineering: A, 2008
- Improving Overall Mechanical Performance of Magnesium Using Nano‐Alumina Reinforcement and Energy Efficient Microwave Assisted Processing RouteAdvanced Engineering Materials, 2007