The study of tribological properties of laser‐textured surface of 2024 aluminium alloy under boundary lubrication
Authors:
- 26 January 2012
- journal article
- research article
- Published by Wiley in Lubrication Science
- Vol. 24 (2) , 84-93
Abstract
The tribological property of aluminium alloy is critical for its reliable operation in practical applications. In this paper, the tribological performance of laser‐textured 2024 aluminium alloy is studied in unidirectional sliding tests under boundary lubrication. The dimples were produced on the aluminium alloy surface by using a pulse Nd : YAG laser. The topographical microstructures of these laser‐induced textures were characterised by optical and scanning electron microscopy. In comparison with untextured surfaces, a significant improvement in friction behaviour was observed for the textured surfaces. The influences of dimples density on the tribological properties were investigated. Two types of oil with different viscosities were evaluated as lubricants. It was found that the beneficial effects of laser surface texturing are more pronounced at higher speed and load with higher viscosity oil. The optimum dimples density of 8.5% was found to have a lower friction coefficient. On basis of the experimental results, the mechanism of friction reduction and anti‐wear is proposed. Copyright © 2012 John Wiley & Sons, Ltd.Keywords
Funding Information
- National Key Basic Research Program of China (2011CB706603)
- National Natural Science Foundation of China (51175493)
This publication has 18 references indexed in Scilit:
- Significance of Dimple Parameters on the Friction of Sliding Surfaces Investigated by Orthogonal ExperimentsTribology Transactions, 2010
- Friction evaluation of lubricated laser-textured surfacesLubrication Science, 2010
- Tribological and mechanical properties of Al alloyed bearingsJournal of Alloys and Compounds, 2009
- Corrosion inhibition of AA6060 aluminium alloy by lanthanide salts in chloride solutionJournal of Alloys and Compounds, 2009
- Microlubrication effect by laser-textured steel surfacesWear, 2007
- Functional properties of microstructured cylinder liner surfaces for internal combustion enginesTribotest, 2005
- The Effect of Laser Texturing of Steel Surfaces and Speed-Load Parameters on the Transition of Lubrication Regime from Boundary to HydrodynamicTribology Transactions, 2004
- Effect of surface texturing on friction reduction between ceramic and steel materials under lubricated sliding contactWear, 2003
- Basics of machining methods to yield wear- and fretting-resistive surfaces, having regular roughness patternsWear, 1997
- Boundary lubrication of an aluminum alloy by tribopolymerization of a monomer under a fretting contact conditionWear, 1997