Large‐Scale Production of κ‐Carrageenan Droplets for Gel‐Bead Production: Theoretical and Practical Limitations of Size and Production Rate
Authors:
- 1 March 1993
- journal article
- research article
- Published by Wiley in Biotechnology Progress
- Vol. 9 (2) , 186-192
Abstract
Immobilization of biocatalysts in κ‐carrageenan gel beads is a widely used technique nowadays. Several methods are used to produce the gel beads. The gel‐bead production rate is usually sufficient to make the relatively small quantities needed for bench‐scale experiments. The droplet diameter can, within limits, be adjusted to the desired size, but it is difficult to predict because of the non‐Newtonian fluid behavior of the κ‐carrageenan solution. Here we present the further scale‐up of the extrusion technique with the theory to predict the droplet diameters for non‐Newtonian fluids. The emphasis is on the droplet formation, which is the rate‐limiting step in this extrusion technique. Uniform droplets were formed by breaking up a capillary jet with a sinusoidal signal of a vibration exciter. At the maximum production rate of 27.6 dm3/h, uniform droplets with a diameter of (2.1 ± 0.12) × 10−3 m were obtained. This maximum flow rate was limited by the power transfer of the vibration exciter to the liquid flow. It was possible to get a good prediction of the droplet diameter by estimating the local viscosity from shear‐rate calculations and an experimental relation between the shear rate and viscosity. In this way the theory of Newtonian fluids could be used for the non‐Newtonian κ‐carrageenan solution. The calculated optimal break‐up frequencies and droplet sizes were in good agreement with those found in the experiments.Keywords
This publication has 16 references indexed in Scilit:
- Effect of agitation rate on cell release rate and metabolism during continuous fermentation with entrapped growingBiotechnology Techniques, 1992
- Batch fermentation with entrapped growing cells ofLactobacillus caseiApplied Microbiology and Biotechnology, 1990
- Evaluation of some gelling agents for immobilization of aerobic microbial cells in alginate and carrageenan gel beadsBiotechnology Techniques, 1989
- Performance of growing Nitrosomonas europaea cells immobilized in ?-carrageenanApplied Microbiology and Biotechnology, 1989
- Immobilization of biocatalysts in thermogels using the resonance nozzle for rapid drop formation and an organic solvent for gellingBiotechnology Techniques, 1988
- A new technique for the production of immobilized biocatalyst in large quantitiesBiotechnology and Bioengineering, 1985
- Theoretical prediction of the sizes of drops formed in the breakup of capillary jetsChemical Engineering Science, 1970
- Newtonian jet stabilityAIChE Journal, 1966
- Drop sizes from low speed jetsJournal of the Franklin Institute, 1955
- Zum Zerfall eines FlüssigkeitsstrahlesZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 1931