Effect of Bias Arc on Microstructure and Corrosion Resistance of Q235/304 Dissimilar-Steel-Welded Joints
Open Access
Abstract
To fully exploit the advantages of steel, the welding connection of dissimilar steels has been developed. In this work, the metallographic microstructures, elemental distributions, and electrochemical corrosion properties of the Q235 and 304 welds under different bias arcs were investigated. The arc bias caused the Q235-side heat-affected zone to widen, the microstructure consisted of ferrite and pearlite, and the ratio varied with decreasing distance from the fusion line. Elemental scans show that Cr and Ni concentration gradients exist near the fusion line. The 304-stainless-steel-side heat-affected zone was mainly composed of austenite grains, and the fusion zone was narrower but prone to cracking. Electrochemical tests revealed that 304 stainless steel had the best corrosion resistance, while Q235 had the worst corrosion resistance, and that the welded joints with an arc bias toward the 304 side had the best corrosion resistance. The samples’ the passivation film which formed via electrochemical polarization had limited stability, but the over-passivation potential could be used as a reference for corrosion resistance. Overall, the arc bias and weld material properties significantly affected the microstructure and corrosion resistance of the joints.Keywords
This publication has 18 references indexed in Scilit:
- Temperature field simulation and asymmetric heat transfer distribution of dissimilar steel welded with external transverse magnetic fieldMaterials Today Communications, 2023
- Corrosion behaviors and mechanical properties of Q235 steel pipes collapsing due to corrosion after 25-year service in urban industrial atmospheric environmentConstruction and Building Materials, 2023
- Structural Integrity Assessment of Inconel 617/P92 Steel Dissimilar Welds Produced Using the Shielded Metal Arc Welding ProcessJournal of Materials Engineering and Performance, 2023
- Electron beam welding of P91 steel and incoloy 800HT and their microstructural studies for advanced ultra super critical (AUSC) power plantsInternational Journal of Pressure Vessels and Piping, 2023
- Comparative studies on microstructure evolution and corrosion resistance of 304 and a newly developed high Mn and N austenitic stainless steel welded jointsCorrosion Science, 2021
- Microstructure and composition evolution of a single-crystal superalloy caused by elements interdiffusion with an overlay NiCrAlY coating on oxidationJournal of Materials Science & Technology, 2020
- Microstructure and mechanical properties of stainless steel clad plate joints produced by TIG and MAG hybrid weldingJournal of Adhesion Science and Technology, 2019
- Microstructural, mechanical and corrosion properties of dissimilar joint between AISI A321 stainless steel and ASTM A537CL1 structural steel produced by GTAW processMetallurgical Research & Technology, 2019
- Effects of Carbon and Nitrogen on the Microstructure and Mechanical Properties of Carbonitrided Low-Carbon SteelJournal of Materials Engineering and Performance, 2015
- Corrosion and tribological studies of chromium nitride coated on steel with an interlayer of electroplated chromiumSurface and Coatings Technology, 2000