Personalized 3D-printed anthropomorphic whole-body phantom irradiated by protons, photons, and neutrons
Open Access
- 1 February 2022
- journal article
- research article
- Published by IOP Publishing in Biomedical Physics & Engineering Express
- Vol. 8 (2) , 027004
Abstract
The objective of this study was to confirm the feasibility of three-dimensionally-printed (3D-printed), personalized whole-body anthropomorphic phantoms for radiation dose measurements in a variety of charged and uncharged particle radiation fields. We 3D-printed a personalized whole-body phantom of an adult female with a height of 154.8 cm, mass of 90.7 kg, and body mass index of 37.8 kg/m2. The phantom comprised of a hollow plastic shell filled with water and included a watertight access conduit for positioning dosimeters. It is compatible with a wide variety of radiation dosimeters, including ionization chambers that are suitable for uncharged and charged particles. Its mass was 6.8 kg empty and 98 kg when filled with water. Watertightness and mechanical robustness were confirmed after multiple experiments and transportations between institutions. The phantom was irradiated to the cranium with therapeutic beams of 170-MeV protons, 6-MV photons, and fast neutrons. Radiation absorbed dose was measured from the cranium to the pelvis along the longitudinal central axis of the phantom. The dose measurements were made using established dosimetry protocols and well-characterized instruments. For the therapeutic environments considered in this study, stray radiation from intracranial treatment beams was the lowest for proton therapy, intermediate for photon therapy, and highest for neutron therapy. An illustrative example set of measurements at the location of the thyroid for a square field of 5.3 cm per side resulted in 0.09, 0.59, and 1.93 cGy/Gy from proton, photon, and neutron beams, respectively. In this study, we found that 3D-printed personalized phantoms are feasible, inherently reproducible, and well-suited for therapeutic radiation measurements. The measurement methodologies we developed enabled the direct comparison of radiation exposures from neutron, proton, and photon beam irradiations.Keywords
Funding Information
- The Discover Undergraduate Research Program at Louisiana State University
- The Bella Bowman Foundation
This publication has 56 references indexed in Scilit:
- The predicted relative risk of premature ovarian failure for three radiotherapy modalities in a girl receiving craniospinal irradiationPhysics in Medicine & Biology, 2013
- Comparative simulations of neutron dose in soft tissue and phantom materials for proton and carbon ion therapy with actively scanned beamsMedical Physics, 2011
- Dosimetry measurements at the fast neutron therapy facility in SeattleRadiation Measurements, 2010
- Frequency Distribution of Second Solid Cancer Locations in Relation to the Irradiated Volume Among 115 Patients Treated for Childhood CancerInternational Journal of Radiation Oncology - Biology - Physics (IJROBP), 2009
- The risk of developing a second cancer after receiving craniospinal proton irradiationPhysics in Medicine & Biology, 2009
- Accelerator beam data commissioning equipment and procedures: Report of the TG‐106 of the Therapy Physics Committee of the AAPMMedical Physics, 2008
- A feasibility study to calculate unshielded fetal doses to pregnant patients in 6-MV photon treatments using Monte Carlo methods and anatomically realistic phantomsMedical Physics, 2008
- Chronic Health Conditions in Adult Survivors of Childhood CancerNew England Journal of Medicine, 2006
- American Association of Physicists in Medicine Radiation Therapy Committee Task Group 53: Quality assurance for clinical radiotherapy treatment planningMedical Physics, 1998
- Uniformity in dosimetry protocols for therapeutic applications of fast neutron beamsMedical Physics, 1987