Analysis and Optimization of Static Contact Characteristics of Heavy-Duty Tracked Vehicle Rollers
Open Access
- 24 April 2021
- journal article
- research article
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2021, 1-12
Abstract
The static contact characteristics of heavy-duty tracked vehicle roller and track plate contact structure are analyzed, and the influence mechanism of the roller’s shape parameters on the contact stress is studied. According to the Hertz contact theory, a mathematical model of the roller and track plate contact is established. The contact structure model is established in ANSYS software, and the simulation results are compared with the Hertz theory results to verify each other. In the parameter optimization section for the roller and track plate, based on the Hertz stress calculation formula, a new method is proposed to establish a roller and track plate Kriging model and to globally optimize the model by the genetic algorithm (GA). After that, the relationship among the track roller radius , the track roller rim radius , and the track plate rim radius is analyzed. The results show that the difference between the radius of the rim of the roller and the track plate and the radius of the roller rim both affect the maximum contact stress. Changing the plane contact into the curved surface contact can reduce the maximum contact stress by 33%. This study can provide a reference for the design and manufacture of supporting track rollers and track plates.Keywords
Funding Information
- Science and Technology Development Fund, Macau SAR (SKL-IOTSC-2018-2020)
This publication has 27 references indexed in Scilit:
- Elastic and Plastic Analysis of Drive Wheel’s Hertz ContactApplied Mechanics and Materials, 2012
- 3-D Rail–Wheel contact analysis using FEAAdvances in Engineering Software, 2012
- Analysis of the spreader track wheels premature damagesEngineering Failure Analysis, 2012
- Contact stress calculation of undercut spur and helical gear teethMechanism and Machine Theory, 2011
- Global Optimization of Lateral Performance for Two-Post ROPS Based on the Kriging Model and Genetic AlgorithmStrojniški vestnik - Journal of Mechanical Engineering, 2011
- Design of Four Contact-Point Slewing Bearing With a New Load Distribution Procedure to Account for Structural StiffnessJournal of Mechanical Design, 2010
- Effect of addendum on contact strength, bending strength and basic performance parameters of a pair of spur gearsMechanism and Machine Theory, 2008
- The generation principle and mathematical models of a novel cosine gear driveMechanism and Machine Theory, 2008
- Application of kriging method to structural reliability problemsStructural Safety, 2005
- Structural optimization using Kriging approximationComputer Methods in Applied Mechanics and Engineering, 2003