The Low-Cycle Fatigue Behavior, Failure Mechanism and Prediction of SLM Ti-6Al-4V Alloy with Different Heat Treatment Methods
Open Access
Abstract
Selective laser melting (SLM) is a promising additive manufacturing (AM) process for high-strength or high-manufacturing-cost metals such as Ti-6Al-4V widely applied in aeronautical industry components with high material waste or complex geometry. However, one of the main challenges of AM parts is the variability in fatigue properties. In this study, standard cyclic fatigue and monotonic tensile testing specimens were fabricated by SLM and subsequently heat treated using the standard heat treatment (HT) or hot isostatic pressing (HIP) methods. All the specimens were post-treated to relieve the residual stress and subsequently machined to the same surface finishing. These specimens were tested in the low-cycle fatigue (LCF) regime. The effects of post-process methods on the failure mechanisms were observed using scanning electron microscopy (SEM) and optical microscopy (OM) characterization methods. While the tensile test results showed that specimens with different post-process treatment methods have similar tensile strength, the LCF test revealed that no significant difference exists between HT and HIP specimens. Based on the results, critical factors influencing the LCF properties are discussed. Furthermore, a microstructure-based multistage fatigue model was employed to predict the LCF life. The results show good agreement with the experiment.Keywords
This publication has 47 references indexed in Scilit:
- On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performanceInternational Journal of Fatigue, 2013
- Perspectives on Titanium Science and TechnologyActa Materialia, 2013
- Microporosity effects on cyclic plasticity and fatigue of LENS™-processed steelActa Materialia, 2010
- A study of the microstructural evolution during selective laser melting of Ti–6Al–4VActa Materialia, 2010
- Microstructure-based multistage fatigue modeling of aluminum alloy 7075-T651Engineering Fracture Mechanics, 2007
- Microstructure-based fatigue modeling of cast A356-T6 alloyEngineering Fracture Mechanics, 2003
- Cyclic deformation in ductile single crystals1998
- Low‐Cycle Fatigue Behavior of Reinforcing SteelJournal of Materials in Civil Engineering, 1994
- A Modified Universal Slopes Equation for Estimation of Fatigue Characteristics of MetalsJournal of Engineering Materials and Technology, 1988
- Fatigue: A complex subject—Some simple approximationsExperimental Mechanics, 1965