Influence of weld geometry and process on fatigue crack growth characteristics of AISI 304L cruciform joints containing lack of penetration defects
Authors:
- 1 October 2002
- journal article
- research article
- Published by SAGE Publications in Science and Technology of Welding and Joining
- Vol. 7 (5) , 306-312
Abstract
The influence of weld geometry in conjunction with the gas tungsten arc welding (GTAW) and gas metal arc welding (GMAW) processes on fatigue properties of AISI 304L load carrying transverse fillet welded cruciform joints, containing lack of penetration (LOP) defects, has been studied. The fatigue lives of the joints were evaluated using conventional S -N (stress - number of cycles to failure) and fracture mechanics methods. The fatigue lives were calculated according to the two stage approach in which both the fatigue crack initiation and the crack propagation phases were considered. Constant amplitude fatigue experiments with stress ratio R=0 were carried out using a 100 kN servohydraulic Dartec universal testing machine at a frequency of 30 Hz. An automatic crack monitoring system based on crack propagation gauges was used to obtain the crack initiation and propagation data during the fatigue process. The predicted life was compared with the experimental values. It was found that the fatigue lives of the joints fabricated via GTAW were longer than those of the corresponding GMAW joints. It was also observed that the fillet geometry plays a major role in determining the failure mode and life. Test results have been compared with the BS 5400 design curve.Keywords
This publication has 5 references indexed in Scilit:
- A new fracture mechanics method to predict the fatigue life of welded cruciform jointsEngineering Fracture Mechanics, 1995
- Growth and coalescence of fatigue cracks at weld toes in steelInternational Journal of Pressure Vessels and Piping, 1991
- A REVIEW OF FATIGUE CRACK GROWTH CHARACTERISATION BY LINEAR ELASTIC FRACTURE MECHANICS (LEFM). PART II—ADVISORY DOCUMENTS AND APPLICATIONS WITHIN NATIONAL STANDARDSFatigue & Fracture of Engineering Materials & Structures, 1988
- Fatigue Strength of Fillet Welded Cruciform JointsJournal of the Structural Division, 1979
- A Critical Analysis of Crack Propagation LawsJournal of Basic Engineering, 1963