The Role of Sulfide Inclusion Morphology in Pit Initiation of Several Type 300 Series Stainless Steels
Authors:
- P. E. ManningPMP. E. Manning
- D. J. DuquetteDDD. J. Duquette
- 1 June 1980
- journal article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 36 (6) , 313-319
Abstract
Pitting potential measurements have been made on several single phase Type 300 series stainless steels and duplex Type 304L alloy by the potentiodynamic test method. The heat of Type 316L stainless steel examined was more susceptible to pit initiation than the heat of Type 304L stainless steel that was studied. Several heat treatments were examined, and the effects of chloride ion concentration, pH, and temperature of the electrolyte on the pit initiation of single phase and duplex alloys were investigated. The effects of heat treatment demonstrate the importance of the morphology of sulfide inclusions that are exposed to the electrolyte. The sulfide dissolution kinetics, which are presumed to control the pit initiation process, are influenced by the morphology of the inclusions exposed to the electrolyte, the time constraints of the various pitting corrosion test methods, the temperature and composition of the bulk electrolyte, and the spectrum of sulfide inclusion compositions present in the alloy.Keywords
This publication has 14 references indexed in Scilit:
- On the Initiation of Crevice Corrosion on Stainless SteelJournal of the Electrochemical Society, 1976
- Electron Microprobe Study of the Effect of Sulphide Inclusions on the Nucleation of Corrosion Pits in Stainless SteelsBritish Corrosion Journal, 1970
- Effect of sulphide inclusions in a commercial stainless steel on the nucleation of corrosion pitsCorrosion Science, 1969
- Review article on the influence of sulphide inclusions on the corrodibility of Fe and steelCorrosion Science, 1969
- The Pitting Potential of Stainless Steels in Chloride MediaJournal of the Electrochemical Society, 1966
- Environmental Factors Affecting the Critical Potential for Pitting in 18–8 Stainless SteelJournal of the Electrochemical Society, 1966
- Theory Of Stainless Steel PittingCorrosion, 1964
- Pitting Corrosion of 18Cr-8Ni Stainless SteelJournal of the Electrochemical Society, 1956
- The Effect of Alloying Elements in Iron on Hydrogen Over-voltage and Corrosion Rate in Acid EnvironmentsJournal of the Electrochemical Society, 1955
- The inhibition by quinolines and thioureas of the acid dissolution of mild steelJournal of Chemical Technology & Biotechnology, 1953