3D‐Integrated, Multi‐Functional Carbon Fibers for Stable, High‐Areal‐Capacity Batteries
- 18 August 2023
- journal article
- research article
- Published by Wiley in Advanced Energy Materials
- Vol. 13 (37)
Abstract
Increasing lithium‐ion batteries' (LIBs) electrode areal capacity can boost energy density and lower manufacturing costs, but faces challenges in manufacturing, rate performance, and cycling stability. A conductive framework made of commercial micro‐sized carbon fibers (Cfs) is presented that serves as a host for both the LiNi0.5Mn0.3Co0.2O2 (NMC 532) cathode and Cfs anode. The Cf framework has multiple functions that offer high electronic conductivity (270 mS cm−1), low tortuosity (1.7), low Li+ diffusion resistance (22 Ω), and high thermal conductivity (200 W mK−1). Additionally, the Cf‐integrated electrodes can have an extremely high mass loading of NMC 532 (70 mg cm−2) with a theoretical capacity of 14 mAh cm−2. Thus, the practical full cells assembled with the Cfs‐enabled electrodes exhibit an initial areal capacity of 4.1 mAh cm−2 and capacity retention of 90.4% at 500 cycles at a cycling rate of C/3, 1.5 mA cm−2. Data collected from the operando isothermal microcalorimetry suggest that full cells utilizing the Cf anode experience less heat release from side reactions compared to cells utilizing a conventional graphite anode. This present approach is scalable and cost‐effective and can fabricate practical LIBs that boast high areal capacity, rate performance, and a lengthy cycling lifetime.Keywords
Funding Information
- Office of Energy Efficiency and Renewable Energy
- Transportation Technologies Office
- U.S. Department of Energy (DEEE0007765, DE‐AC05‐00OR22725)
- Oak Ridge National Laboratory
This publication has 40 references indexed in Scilit:
- A review of laser electrode processing for development and manufacturing of lithium‐ion batteriesNanophotonics, 2017
- Highly Conductive, Lightweight, Low‐Tortuosity Carbon Frameworks as Ultrathick 3D Current CollectorsAdvanced Energy Materials, 2017
- High-performance battery electrodes via magnetic templatingNature Energy, 2016
- Graphene Oxide‐Based Electrode Inks for 3D‐Printed Lithium‐Ion BatteriesAdvanced Materials, 2016
- Optimizing Areal Capacities through Understanding the Limitations of Lithium-Ion ElectrodesJournal of the Electrochemical Society, 2015
- Thick Electrodes for High Energy Lithium Ion BatteriesJournal of the Electrochemical Society, 2015
- Towards greener and more sustainable batteries for electrical energy storageNature Chemistry, 2014
- Probing the Thermal Implications in Mechanical Degradation of Lithium-Ion Battery ElectrodesJournal of the Electrochemical Society, 2014
- Interface layer formation in solid polymer electrolyte lithium batteries: an XPS studyJournal of Materials Chemistry A, 2014
- Quantifying tortuosity in porous Li-ion battery materialsJournal of Power Sources, 2009