Abstract
A theoretical and experimental analysis is carried out of radiative heat transfer in the coaxial geometry of evacuated tube solar collectors, with emphasis on the operation at high temperatures for industrial process heat. Radiative heat transfer is usually described using the grey body approximation which strictly does not apply to selective absorber coatings. Also, the outer envelope of a tubular collector is partially transmitting in the thermal infrared, especially when constructed of borosilicate glass. We evaluate the effect of such transmission by developing analytic expressions for the heat transfer through the outer glass envelope and show the equations of heat transfer no longer follow a simple form where an effective emissivity for the system as previously used cannot be defined. To test all approximations in practice, an experiment is performed using an evacuated solar collector manufactured in the 1980s by the Nitto Kohki company in Japan using the effective emissivity approximation to determine the typical heat transfer characteristics using net radiative heat flows in both directions. The effective emittance method enabled a good fit to temperature-time data for cooling and heating of the inner tube. The results confirm that the effective emittance method can be used in situations with typical glass wall thickness, even though there is radiative transfer through the outer envelope. The work has verified the stability of the vacuum in this type of collector as the tube still functions well in terms of maintaining a low emissivity and good vacuum after approximately 40 years in storage conditions.

This publication has 13 references indexed in Scilit: