Analysis of Clock Scheduling in Frequency Domain for Digital Switching Noise Suppressions
- 10 May 2018
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 26 (9) , 1685-1698
Abstract
This paper presents a methodology for digital switching noise suppressions on the power lines at a fundamental frequency as well as its harmonics by using a clock scheduling technique in the frequency domain. Our approach provides a deep insight of the clock scheduling at the arbitrary phase shifts of clock signals. Moreover, an optimization algorithm is applied to find an optimal phase shift of a clock signal in order to maximize noise suppressions at a specific frequency band. The experimental results on a Xilinx field-programmable gate array Spartan-3 (XC3S400-TQ144) show that the estimated noise reduction rates well-match the measured ones. In these tests, dummy logics are used as noise injectors. This paper also presents a design example with a data encryption standard cryptoprocessor to demonstrate the applicability of our approach. The experiments show that the highest error between the estimated and the measured results is about 2.5 dB. Interestingly, our approach seems to be appropriately used with the designs in wireless communications where designers address to minimize the digital switching noise at the specific frequency bands of interest.Keywords
Funding Information
- National Research Foundation (2015R1D1A3A01019869)
This publication has 21 references indexed in Scilit:
- Practical considerations for electromagnetic interference suppression rate with spread spectrum clockingIEEE Electromagnetic Compatibility Magazine, 2016
- Frequency-Domain Optimization of Digital Switching Noise Based on Clock SchedulingIEEE Transactions on Circuits and Systems I: Regular Papers, 2016
- Mixing Drivers in Clock-Tree for Power Supply Noise ReductionIEEE Transactions on Circuits and Systems I: Regular Papers, 2015
- Clock skew optimization for maximizing time margin by utilizing flexible flip-flop timing2015
- Minimizing coupling of power supply noise between digital and RF circuit blocks in mixed signal systems2014
- A Low EMI Circuit Design with Asynchronous Multi-Frequency ClockingIEICE Transactions on Electronics, 2014
- Evaluation of PDN impedance and power supply noise for different on-chip decoupling structures2013
- GALS Design for Spectral Peak Attenuation of Switching Current2013
- Prototyping Globally Asynchronous Locally Synchronous Circuits on Commercial Synchronous FPGAs2006
- Introduction to Optimization2005