Self-tuning PID controller for active suspension system with hydraulic actuator
- 1 April 2013
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 86-91
Abstract
This paper investigated the performance of PID controller for active suspension system. A half car model has been simulated by using an analytical model within Matlab SIMULINK environment. Three different road disturbances, namely, the bump and hole, sine and random input have been applied to disturb the suspension system. Based on these three road disturbances, the performances of passive and active suspension system were investigated. Moreover, for active suspension system, hydraulic actuator was included in the simulation and PID controller was introduced. Three tuning methods namely heuristic tuning, Ziegler-Nichols (ZN) tuning, and iterative learning algorithm (ILA) were used to obtain the optimum value of the PID controller parameters. A comparative study was carried out between active and passive suspension systems, and these three methods of tuning the PID controller. The active suspension system has been proven to perform better than the passive suspension system provided the PID controller parameters are tuned properly. Also, in this investigation, the comparative assessment indicated that the PID controller tuned by the iterative learning algorithm for active suspension system with hydraulic actuator has performed better than the other two tuning algorithms.Keywords
This publication has 5 references indexed in Scilit:
- Design of robust H∞, fuzzy and LQR controller for active suspension of a quarter car model2011
- Vehicle active suspension system using skyhook adaptive neuro active force controlMechanical Systems and Signal Processing, 2009
- Revisiting the Ziegler–Nichols step response method for PID controlJournal of Process Control, 2004
- LQR controller for active car suspension2002
- Detection techniques in least squares identificationAutomatica, 1981