Experimental and numerical evaluations of adhesion strength and stress in TiN films deposited on ti-implanted aluminum
- 8 February 2006
- journal article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 24 (2) , 212-217
Abstract
Titanium ions were implanted into aluminum substrates at prior to magnetron sputtering deposition of the Ti interlayer and TiN film using our custom-designed multifunctional ion implanter without breaking vacuum. An -thick modified layer was formed between the TiN film and the substrate. The characteristics of the implanted samples were compared to those of and samples that were not preimplanted. Based on our scratch tests, the critical loading of the -implanted Al sample was significantly improved compared to the unimplanted and samples. Finite element analysis was conducted to simulate the scratch process to help reveal the stress distributions in the vicinity of the interlayer. The results show that the stress around the interface is largely reduced in the -implanted Al sample. Consequently, the mechanical properties such as resistance to loadings are enhanced.
Keywords
This publication has 24 references indexed in Scilit:
- First-principles study of polar Al/TiN(1 1 1) interfacesActa Materialia, 2004
- Effects of the thickness of Ti buffer layer on the mechanical properties of TiN coatingsSurface and Coatings Technology, 2003
- Optimisation of carbon implantation pre-treatments on the adhesion strength of amorphous carbon coatings on AISI 440C steel substratesSurface and Coatings Technology, 2003
- Influence of the sputtering gas on the preferred orientation of nanocrystalline titanium nitride thin filmsThin Solid Films, 2002
- Soft films on hard substrates — nanoindentation of tungsten films on sapphire substratesMaterials Science and Engineering: A, 2001
- The use of preliminary ion implantation and heating on the substrate for modifying TiN coating properties and TiN/substrate interfaceSurface and Coatings Technology, 2001
- Effects of Ti interlayer on the microstructure of ion-plated TiN coatings on AISI 304 stainless steelThin Solid Films, 1997
- Comparison of the tribological characteristics of titanium nitride and titanium carbonitride coating filmsSurface and Coatings Technology, 1996
- Application of modern aluminum alloys to aircraftProgress in Aerospace Sciences, 1996
- Multilayer PVD coatings for wear protectionSurface and Coatings Technology, 1995