Physical Properties of Micro Hollow Glass Bead Filled Castor Oil-Based Polyurethane/Epoxy Resin IPN Composites
Authors:
- 12 January 2017
- journal article
- research article
- Published by Taylor & Francis in Journal of Macromolecular Science, Part B
- Vol. 56 (3) , 161-169
Abstract
A series of micro hollow glass beads (HGB) filled castor oil-based polyurethane/epoxy resin graft interpenetrating polymer network (IPN) composites were prepared. The tensile and impact strengths, impact fractured surfaces, damping properties and thermal stability of the IPN composites were studied systematically in terms of composition. Results revealed that the addition of HGB into polyurethane/epoxy IPN can significantly improve not only the tensile strength but also the impact strength. The tensile strength was increased by 61% and at the same time the impact strength was increased by 25% when the HGB content was 1.5%. The damping properties were better than the composition of 0.5% or 2% HGB content when the HGB content was 1% or 1.5%. The thermal decomposition temperature was also slightly improved by the incorporation of HGB. It is suggested that the HGB reinforced polyurethane/epoxy resin IPN composites could be used as structural damping materials.Keywords
This publication has 21 references indexed in Scilit:
- Preparation and dynamic mechanical properties of polyurethane‐modified epoxy composites filled with functionalized fly ash particulatesJournal of Applied Polymer Science, 2007
- Composites of UHMWPE fiber reinforced PU/epoxy grafted interpenetrating polymer networksEuropean Polymer Journal, 2007
- Tensile and Flexural Properties of Hollow Glass Bead-filled ABS CompositesJournal of Elastomers & Plastics, 2005
- Increased flow property of polycarbonate by adding hollow glass beadsPolymer Engineering & Science, 2005
- Synthesis and characterization of nanocomposites of silicon dioxide and polyurethane and epoxy resin interpenetrating networkPolymer International, 2003
- Mechanical, thermal and morphological behavior of bismaleimide modified polyurethane‐epoxy IPN matricesPolymers for Advanced Technologies, 2003
- Poly(ether urethane)/poly(ethyl methacrylate) interpenetrating polymer networks: Morphology, phase continuity and mechanical properties as a function of compositionPolymer, 1996
- Interpenetrating polymer networks: A review on synthesis and propertiesPolymer International, 1994
- Interpenetrating Polymer Networks1990
- Glass transitions of topologically interpenetrating polymer networksPolymer Engineering & Science, 1974