Multilaboratory comparison of traceable atomic force microscope measurements of a 70-nm grating pitch standard
- 1 January 2011
- journal article
- Published by SPIE-Intl Soc Optical Eng in Journal of Micro/Nanolithography, MEMS, and MOEMS
- Vol. 10 (1) , 013015-013015-12
Abstract
The National Institute of Standards and Technology (NIST), Advanced Surface Microscopy (ASM), and the National Metrology Centre (NMC) of the Agency for Science, Technology, and Research (A*STAR) in Singapore have completed a three-way interlaboratory comparison of traceable pitch measurements using atomic force microscopy (AFM). The specimen being used for this comparison is provided by ASM and consists of SiO2 lines having a 70-nm pitch patterned on a silicon substrate. For this comparison, NIST used its calibrated atomic force microscope (C-AFM), an AFM with incorporated displacement interferometry, to participate in this comparison. ASM used a commercially available AFM with an open-loop scanner, calibrated with a 144-nm pitch transfer standard. NMC/A*STAR used a large scanning range metrological atomic force microscope with He-Ne laser displacement interferometry incorporated. The three participants have independently established traceability to the SI (International System of Units) meter. The results obtained by the three organizations are in agreement within their expanded uncertainties and at the level of a few parts in 104.Keywords
This publication has 11 references indexed in Scilit:
- Scanning probe microscope dimensional metrology at NISTMeasurement Science and Technology, 2010
- Bilateral comparison of 25 nm pitch nanometric lateral scales for metrological scanning probe microscopesMeasurement Science and Technology, 2010
- Frequency-shifting method for phase retrieval from fringe patterns2008
- Picometer-scale accuracy in pitch metrology by optical diffraction and atomic force microscopy2008
- NANO5—2D Grating—Final reportMetrologia, 2008
- Final report on Supplementary Comparison APMP.L-S2: Bilateral comparison on pitch measurements of nanometric lateral scales (50 nm and 100 nm) between NMIJ/AIST (Japan) and PTB (Germany)Metrologia, 2007
- Traceable atomic force microscope dimensional metrology at NIST2006
- Automated, high precision measurement of critical dimensions using the atomic force microscopeJournal of Vacuum Science & Technology A, 1999
- Dimensional metrology with the NIST calibrated atomic force microscope1999
- Measurement of pitch and width samples with the NIST calibrated atomic force microscope1998