Frictional behaviour of engineering surfaces in overall lubrication regimes of point contacts
Authors:
- 23 September 2011
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Vol. 225 (11) , 1071-1080
Abstract
The aim of the present paper is to study experimentally and numerically the frictional behaviour of engineering surfaces within all lubrication regions of point contacts. For this reason, a numerical solution proposed elsewhere by the current authors, which can predict friction under the different lubrication modes of elastohydrodynamic, mixed, and boundary lubrications, is introduced. Based on a deterministic model of mixed lubrication, the solution was combined with the variation of the lubricating films’ physical state during the transition of lubrication modes. Results show that roughness amplitude has a great effect on the transition of friction regimes. In addition, it is also observed that variation of the friction coefficient has nearly the same trend as the true contact area ratio in the mixed lubrication state. Meanwhile, it is concluded that transverse roughness has better film-forming capacity than longitudinal roughness and thus leads to a lower magnitude of friction coefficient if the operating conditions are the same. Analysis of the mechanism of friction behaviour suggests that the true contact area ratio determines the friction behaviour of engineering surfaces in mixed lubrication. In smooth contacts, the comparison of experiment tests and simulation results suggests that friction variation results from gradual change of the liquid lubricant to solid-like matter with diminishing film thickness.Keywords
This publication has 33 references indexed in Scilit:
- Micro-geometry effects on the sliding friction transition in elastohydrodynamic lubricationProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2010
- Influence of Design Parameters on Mechanical Power Losses of Helical Gear PairsJournal of Advanced Mechanical Design, Systems, and Manufacturing, 2009
- Transition of frictional states and surface roughness effects in lubricated contactsProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2008
- Effect of Deterministic Asperity Geometry on Hydrodynamic LubricationJournal of Tribology, 2004
- Influence of Longitudinal Roughness on Friction in EHL ContactsJournal of Tribology, 2004
- Origins of solidification when a simple molecular fluid is confined between two platesThe Journal of Chemical Physics, 2001
- A Full Numerical Solution to the Mixed Lubrication in Point ContactsJournal of Tribology, 1999
- Thermal EHL Analysis of Circular Contacts With Measured Surface RoughnessJournal of Tribology, 1996
- The Effects of Surface Texture on EHL Point ContactsJournal of Tribology, 1996
- Multiport Models for the Kinematic and Dynamic Analysis of Gear Power TransmissionsJournal of Mechanical Design, 1979