Buckling of Fibres and Yarns within Ropes and Other Fibre Assemblies
Authors:
- 1 January 2000
- journal article
- research article
- Published by Taylor & Francis in The Journal of the Textile Institute
- Vol. 91 (3) , 335-358
Abstract
Individual yarns within ropes can be subject to axial compression even though the rope as a whole is under tension. This leads to buckling in sharp kinks and then to failure by axial-compression fatigue after repeated cycling. An existing elastic theory, which applies to heated pipelines subject to lateral and axial restraint, predicts alternative modes of either continuous buckling or intermittent buckled zones alternating with slip zones. The mechanics of axially compressed yarns within ropes are similar, but the theory is extended to cover plastic deformation at hinge points. The predicted form of groups of sawtooth buckles, which curve at the ends of the zones into the slip lengths, is in agreement with observed effects. Numerical calculation gives quantitative predictions in agreement with experimental results, despite uncertainty about the correct values for bending stiffness and plastic-yield moment, depending on whether the yarns act as solid rods or freely slipping fibre assemblies.Keywords
This publication has 5 references indexed in Scilit:
- Atlas of Fibre Fracture and Damage to Textiles1998
- The flex fatigue of polyamide and polyester fibresJournal of Materials Science, 1991
- Tensile recoil measurement of compressive strength for polymeric high performance fibresJournal of Materials Science, 1987
- In‐Service Buckling of Heated PipelinesJournal of Transportation Engineering, 1984
- Flexural fatigue and surface abrasion of Kevlar-29 and other high-modulus fibresJournal of Materials Science, 1977