Crystallization behavior and tensile performance of nanoparticle-filled polypropylene composites
- 1 October 2013
- journal article
- research article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 48 (23) , 2915-2924
Abstract
Polypropylene nanocomposites containing 1–5 wt% of nano α-alumina particles are prepared using a Hake internal mixer. Mixing of nano α-alumina particles is performed at 170℃ and 50 rotational per minute is set for the rotor speed. To improve the dispersion of the nanoparticles, sodium dodecylbenzenesulfonate is used. X-ray analyses reveal that the basal spacing of polypropylene/nano α-Al2O3 composites compared to the pure polypropylene spreads out. The peak intensity for polypropylene / nano α-Al2O3 composites is stronger and narrower with larger amounts of the nano α-Al2O3 filler, in comparison with the virgin polypropylene. According to differential scanning calorimetry, the crystallinity of the nanocomposites is increased with increases in nano α-Al2O3 filler loading. The storage and loss modulus of the nanocomposites are found to be higher than that of pure polypropylene, because nanofiller increases the stiffness of the nanocomposites. The tensile strength and tensile modulus of the polypropylene nanocomposites are slightly improved up to 4% of nano α-Al2O3 particle filler adding. The addition of filler content higher than that amount leads to the reduction of these properties. The formation of filler agglomeration site within the matrix body affects the decreasing of properties. Transmission electron microscopy observations confirm these results.Keywords
This publication has 19 references indexed in Scilit:
- Surface modification of inorganic nanoparticles for development of organic–inorganic nanocomposites—A reviewProgress in Polymer Science, 2013
- Size-controlled synthesis of nano α-alumina particles through the sol–gel methodCeramics International, 2010
- Dispersion behavior and thermal conductivity characteristics of Al2O3–H2O nanofluidsCurrent Applied Physics, 2009
- Polypropylene-clay composite prepared from Indian bentoniteBulletin of Materials Science, 2008
- Dynamic mechanical and morphological studies of isotactic polypropylene/fumed silica nanocomposites with enhanced gas barrier propertiesComposites Science and Technology, 2006
- Non-isothermal crystallization kinetic behavior of alumina nanoparticle filled poly(ether ether ketone)Materials Chemistry and Physics, 2006
- Crystallization, mechanical, and fracture behaviors of spherical alumina‐filled polypropylene nanocompositesJournal of Polymer Science Part B: Polymer Physics, 2005
- Compatibilisation effect of PP-g-MA copolymer on iPP/SiO2 nanocomposites prepared by melt mixingEuropean Polymer Journal, 2005
- Mechanical properties and toughening mechanisms of polypropylene/barium sulfate compositesComposites Part A: Applied Science and Manufacturing, 2003
- Tensile performance improvement of low nanoparticles filled-polypropylene compositesComposites Science and Technology, 2002