The etching characteristics of polycrystalline silicon (poly‐Si) by short‐time modulated electron cyclotron resonance (ECR) determined by using a Cl2 etchant were investigated. It was found that the poly‐Si etching rate was improved by increasing the pulse interval of the microwaves to more than 50 μs for a 50% duty ratio and applying a 600 kHz rf bias to the substrate. A large amount of negative chlorine ions are generated in the afterglow which occurs for more than 50 μs in high‐density, low‐pressure plasmas. The low rf bias alternately accelerates both the negative and positive ions to the substrate surface. As a result, the pulse‐time modulated ECR plasma can produce high rate and charge‐free etching with a 600 kHz rf bias.