Current and Potential Developments in Methods for the Scale-Up and Design of Column Extractors
Author:
- 1 July 1998
- journal article
- research article
- Published by Taylor & Francis in Mineral Processing and Extractive Metallurgy Review
- Vol. 18 (3-4) , 215-282
Abstract
The current state-of-the-art is design and scale-up procedures for column-type liquid-liquid extractors is reviewed. This covers both the hydrodynamical factors which determine column cross-section and throughput, and those which influence mass transfer via drop-size and holdup, mass transfer coefficient, axial dispersion, drop interactions (i.e., breakage and coalescence), and Marangoni effects. The application of these principles to column design and scale-up is then discussed. It is concluded that for the present, both a matrix inversion method, and a simplified analytical method of adequate accuracy both for performance evaluation from pilot scale data, and for the design of both single-solvent and dual-solvent extractors, are the most suitable. Finally, the possibility is considered of developing more advanced methods based both on Monte Carlo procedures and on direct dynamic simulation by computer. Application Notes for Program ‘COLDSN’ and DUALSOLV appear in Appendix I and Appendix II, respectively.Keywords
This publication has 7 references indexed in Scilit:
- Generalized design equations for backmixed liquid extraction columns with nonlinear equilibriaIndustrial & Engineering Chemistry Research, 1991
- A Warning on the misuse of the dispersion modelChemical Engineering Science, 1983
- An efficient, general method for computation of countercurrent separation processes with axial dispersionAIChE Journal, 1981
- A contribution to the theory of fractional liquid extractionChemical Engineering Science, 1976
- Calculation of the efficiency of counter-current stage-wise mass transfer processes with constant distribution factor, when in the stationary stateChemical Engineering Science, 1951
- Calculation of the efficiency of counter-current stage-wise mass transfer processes with constant distribution factor, when in the stationary stateChemical Engineering Science, 1951
- Fractional Solvent Extraction with RefluxIndustrial & Engineering Chemistry, 1950