Particle image velocimetry and modelling of horizontal coherent liquid jets impinging on and draining down a vertical wall
Authors:
- W. AouadWAW. Aouad
- Julien R. LandelJLJulien R. Landel
- S. B. DalzielSDS. B. Dalziel
- J. F. DavidsonJDJ. F. Davidson
- D. I. WilsonDWD. I. Wilson
Preprint
Abstract
The flow patterns created by a coherent horizontal liquid jet impinging on a vertical wall atmoderate flow rates (jet flowrates 0.5-4.0 L min-1, jet velocities 2.6-21 m s-1) are studied withwater on glass, polypropylene and polymethylmethacrylate (acrylic, Perspex(R)) using a novelparticle image velicometry (PIV) technique employing nearly opaque fluid doped withartificial pearlescence to track surface velocity. Flow patterns similar to those reported inprevious studies are observed on each substrate: their dimensions differed owing to theinfluence of wall material on contact angle. The dimensions are compared with models for (i)the radial flow zone, reported by Wang et al. (2013b), and the part of the draining film belowthe jet impingement point where it narrows to a node. For (ii), the model presented by Mertenset al. (2005) is revised to include a simpler assumed draining film shape and an alternativeboundary condition accounting for surface tension effects acting at the film edge. This refinedmodel gives equally good or better fits to the experimental data. The effective contact anglewhich gives good agreement with the data is found to lie between the measured quasi-staticadvancing and receding contact angles, at approximately half the advancing value. The PIVmeasurements confirmed the existence of a thin fast moving film with radial flow surroundingthe point of impingement, and a wide draining film bounded by ropes of liquid below theimpingement point. While these measurements generally support the predictions of existingmodels, these models assume that the flow is steady. In contrast, surface waves were evident inboth regions and this partly explains the difference between the measured surface velocity andthe values estimated from the models.Keywords
All Related Versions
- Version 1, 2024-07-18, ArXiv
- Published version: Experimental Thermal and Fluid Science, 74, 429.
This publication has 28 references indexed in Scilit:
- Cleaning of a model food soil from horizontal plates by a moving vertical water jetChemical Engineering Science, 2015
- Cleaning of viscous drops on a flat inclined surface using gravity-driven film flowsFood and Bioproducts Processing, 2015
- Positron Emission Particle Tracking (PEPT) for the analysis of water motion in a domestic dishwasherChemical Engineering Journal, 2015
- Flow patterns and draining films created by horizontal and inclined coherent water jets impinging on vertical wallsChemical Engineering Science, 2013
- Effect of surfactant on flow patterns and draining films created by a static horizontal liquid jet impinging on a vertical surface at low flow ratesChemical Engineering Science, 2013
- Surface flow and drainage films created by horizontal impinging liquid jetsChemical Engineering Science, 2012
- On some relations between advancing, receding and Young's contact anglesAdvances in Colloid and Interface Science, 2007
- Dynamics of drop impact on solid surface: Experiments and VOF simulationsAIChE Journal, 2004
- Instantaneous hydrodynamics of a laminar wavy liquid filmInternational Journal of Multiphase Flow, 2002
- Effects of surface roughness on advancing and receding contact angles☆International Journal of Pharmaceutics, 1984