Silver Diffusion in Silicon Carbide Coatings
- 27 April 2011
- journal article
- research article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 94 (9) , 3064-3071
Abstract
We have studied the effect of microstructure on the diffusion of silver (Ag) in different silicon carbide (SiC) coatings in tristructural isotropic‐coated particles. Silicon carbide was deposited at 1300°–1500°C by fluidized bed chemical vapor deposition. The SiC coatings have been heat treated at 1200°–1400°C for 240 h. Depending on the microstructure our results confirm that silver can diffuse by grain‐boundary diffusion but that a high concentration of nano‐ and microporosity at the grain boundaries can strongly influence the diffusion process by increasing the diffusion coefficient by at least two orders of magnitude (from ∼10 −17 for standard coatings to ≥10 −15 m 2 /s at 1200°C). We also show that the presence of excess silicon or the formation of long columnar grains in SiC does not increase the diffusion of silver as previously thought. Our results do not support the idea that silver diffuses through SiC due to the formation of defects produced by mechanical damage (nanocracks). Silver is aiding the recrystallization of SiC when heat treated at 1400°C.Keywords
This publication has 34 references indexed in Scilit:
- Evaluation of silver transport through SiC during the German HTR fuel programJournal of Nuclear Materials, 2009
- Effect of microstructure on the corrosion of CVD-SiC exposed to supercritical waterJournal of Nuclear Materials, 2009
- TRISO coated fuel particles with enhanced SiC propertiesJournal of Nuclear Materials, 2009
- Study of silver diffusion in silicon carbideJournal of Nuclear Materials, 2009
- EBSD for microstructure and property characterization of the SiC-coating in TRISO fuel particlesJournal of Nuclear Materials, 2008
- The effect of annealing at 1500°C on migration and release of ion implanted silver in CVD silicon carbideJournal of Nuclear Materials, 2006
- Effect of deposition temperature on the properties of pyrolytic SiCJournal of Nuclear Materials, 1995
- Release behavior of metallic fission products from HTGR fuel particles at 1600 to 1900°CJournal of Nuclear Materials, 1993
- Chemical vapor deposition of silicon carbide for coated fuel particlesJournal of Nuclear Materials, 1987
- Fission-product release during postirradiation annealing of several types of coated fuel particlesJournal of Nuclear Materials, 1984