Research on surface finish of thin-wall parts by laser with coaxial inside-beam powder feeding
Authors:
- 1 March 2021
- journal article
- research article
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 33 (2) , 022003
Abstract
Surface quality is an important performance indicator of laser metal deposition. Based on annular laser beam internal powder feeding technology, the effect of higher energy of the outer side of the annular beam on the surface roughness and waviness of thin-wall parts is studied in this paper. The influences of laser power, scanning speed, and powder feeding rate on the surface finish of thin-wall parts are investigated. The results show that the laser power has a significant effect on surface finish. With the increase in laser power, the roughness decreases and the waviness increases first and then decreases. High laser power can improve surface finish. As the scanning speed increases, the roughness decreases first and then increases, and the waviness decreases. The scanning speed has a significant influence on surface waviness. Increasing the powder feeding rate is not beneficial to surface quality because the value of the roughness and the surface waviness will add with its rising.Keywords
Funding Information
- National Natural Science Foundation of China (61903268)
- Natural Science Foundation of Jiangsu Province (BK20190823)
- Qinglan Project of Jiangsu Province of China (2018002)
This publication has 16 references indexed in Scilit:
- Polymer viscosity, particle coalescence and mechanical performance in high-temperature laser sinteringJournal of Materials Science, 2016
- An overview of Direct Laser Deposition for additive manufacturing; Part II: Mechanical behavior, process parameter optimization and controlAdditive Manufacturing, 2015
- Machinability investigations on turning of Cr-Ni-based stainless steel cladding formed by laser cladding processThe International Journal of Advanced Manufacturing Technology, 2015
- Study of a hollow laser beam for claddingThe International Journal of Advanced Manufacturing Technology, 2014
- Influence of a pulsed laser regime on surface finish induced by the direct metal deposition process on a Ti64 alloyJournal of Materials Processing Technology, 2014
- Influence of various process conditions on surface finishes induced by the direct metal deposition laser technique on a Ti–6Al–4V alloyJournal of Materials Processing Technology, 2013
- Surface finish in laser solid freeform fabrication of an AISI 303L stainless steel thin wallJournal of Materials Processing Technology, 2012
- Process optimization of Ti–Nb alloy coatings on a Ti–6Al–4V plate using a fiber laser and blended elemental powdersJournal of Materials Processing Technology, 2010
- Effect of Process Parameters on Surface Smoothness in Laser CladdingChinese Journal of Lasers, 2010
- Top surface and side roughness of Inconel 625 parts processed using selective laser meltingRapid Prototyping Journal, 2009