Study of the water cleaning process by using CFD-DEM method: A case study of coarse filter material
Open Access
- 1 January 2024
- journal article
- research article
- Published by National Library of Serbia in Thermal Science
- Vol. 28 (1 Part A) , 65-75
Abstract
In this paper, the CFD-DEM coupling method was utilized to study the water cleaning and regeneration process of fibrous filter material. The effects of cleaning flow rate, time and adhesion force on the particle removal process were simulated. The results showed that the particle removal rate had a diminishing marginal effect with the increasing of cleaning flow rate. More than 80% of the particles were removed in the initial period, and then tended to stabilize. The higher the flow rate, the shorter the time needed to achieve stability. For G4 filter material, the function between the particle removal rate and the cleaning flow rate and time was given, and the best cleaning flow rate was 1.2 m/s while the cleaning time was 30 s. The surface energy of the fibers plays a dominant role in the cleaning process, and the reduction to 1/4 of the surface energy of the particles can effectively improve the cleaning and regeneration performance.Keywords
This publication has 30 references indexed in Scilit:
- Pressure drop model for fibrous media in depth filtration: Coupling simulation of microstructure and CFD porous media during dust loadingBuilding and Environment, 2021
- Effect of main-stage filter media selection on the loading performance of a two-stage filtration systemBuilding and Environment, 2021
- Influence of fiber diameter, filter thickness, and packing density on PM2.5 removal efficiency of electrospun nanofiber air filters for indoor applicationsBuilding and Environment, 2020
- MP-PIC modeling of CFB risers with homogeneous and heterogeneous drag modelsAdvanced Powder Technology, 2018
- Washable Multilayer Triboelectric Air Filter for Efficient Particulate Matter PM2.5 RemovalAdvanced Functional Materials, 2018
- Comparison of contact-force models for the simulation of collisions in DEM-based granular flow codesChemical Engineering Science, 2004
- Resuspension of particulates from surfaces to turbulent flows—Review and analysisJournal of Aerosol Science, 1995
- Adhesion of spheres: The JKR-DMT transition using a dugdale modelJournal of Colloid and Interface Science, 1992
- A Theoretical Review of Particle Adhesion1988
- The permeability of fibrous porous mediaThe Canadian Journal of Chemical Engineering, 1986