Effects of PECVD temperature and RF power on surface structure and refractive index of amorphous and polycrystalline silicon films
Authors:
Open Access
- 23 November 2017
- conference paper
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 917 (3) , 032029
Abstract
The amorphous and polycrystalline silicon films were obtained by plasma enhanced chemical vapor deposition. The effect of power and temperature over a wide range on the surface morphology and structure, deposition rate films and refractive index have been investigated by atomic force microscopy, profilometry and ellipsometry. The deposition rate increased from 19.1 to 58.2 nm/min with RF power from 10 to 40 W. The refractive index of the films obtained at a temperature of 550 to 700 °C was in the range from 3.5 to 5.5.Keywords
This publication has 6 references indexed in Scilit:
- Adhesion and biofilm formation of Streptococcus mutans on dental sealant incorporated with silver-nanoparticle2016
- Effect of deposition temperature on polymorphous silicon thin films by PECVD: Role of hydrogenMaterials Science in Semiconductor Processing, 2016
- Novel aspects in thin film silicon solar cells–amorphous, microcrystalline and nanocrystalline siliconThin Solid Films, 2004
- Polysilicon: a versatile material for microsystemsSensors and Actuators A: Physical, 2002
- Silicon as a mechanical materialProceedings of the IEEE, 1982
- Reversible conductivity changes in discharge-produced amorphous SiApplied Physics Letters, 1977