A Study on the Stern Bearing Damage and Shaft Alignment for 37K DWT Product/Chemical Tanker
Authors:
- Geumsung ParkGPGeumsung Park
- Changik KohCKChangik Koh
- Jaewook ChungJCJaewook Chung
- Gunsik NamGNGunsik Nam
- Junsik ChaeJCJunsik Chae
- 20 April 2021
- journal article
- research article
- Published by The Society of Naval Architects of Korea in Journal of the Society of Naval Architects of Korea
- Vol. 58 (2) , 97-104
Abstract
Together with the emerging of the Eco-ship, the application of large-diameter and high-efficiency propeller required more careful attention than before in the design of the shafting system. After the adoption of Environmentally Acceptable Lubricants (EAL) to the stern tube lubrication oil, a number of aft stern tube bearing accidents have been reported, and a variety of institutions have actively conducted research on the cause relationship. This study attempted to find the cause of the accident by measuring the alignment of the shafting system of a medium-sized product/chemical tanker with aft stern tube bearing damage and analyzing the reaction force of each bearing. In addition, a reasonable solution to the correction of the shaft alignment was suggested and the feasibility was reviewed. Through various measured data and analysis, the actual installation of shafting system was slightly different from the design drawing condition, but it was found that each bearing load distribution was within the allowable range. Therefore, it was confirmed that the cause of this accident was due to the dissatisfaction the misalignment slope of aft stern tube bearing rather than the effect of the bearing overload. As a solution to this cause, countermeasures such as double slope were suggested in the aft stern tube bearing, and the characteristics of EAL also seem to have an indirect effect.Keywords
Funding Information
- MOVENA Korea
This publication has 7 references indexed in Scilit:
- Investigation on effective support point of single stern tube bearing for marine propulsion shaft alignmentMarine Structures, 2019
- Propulsion Shafting Alignment Analysis Considering the Interaction between Shaft Deflection and Oil Film Pressure of Sterntube Journal BearingJournal of the Society of Naval Architects of Korea, 2016
- Effects of Propeller Forces on the Propeller Shaft Bearing during Going Straight and Turning of ShipJournal of the Society of Naval Architects of Korea, 2015
- The Flexibility Estimation of Alignment for Propulsion Shaft System using the Approximated Hull Deflection CurveJournal of Advanced Marine Engineering and Technology, 2009
- Pressure Analysis of Sterntube after Bush Bearing Considering Elastic Deflection of Misaligned Journal and Partial Slope of Bearing BushJournal of the Society of Naval Architects of Korea, 2007
- Development of Elastic Shaft Alignment Design ProgramJournal of the Society of Naval Architects of Korea, 2006
- Pressure Distribution Analysis for After Bush Bearing of Ship Propulsion ShaftJournal of the Society of Naval Architects of Korea, 2004