A Passive Pressure Sensor Fabricated by Post-Fire Metallization on Zirconia Ceramic for High-Temperature Applications
Open Access
- 29 September 2014
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 5 (4) , 814-824
Abstract
A high-temperature pressure sensor realized by the post-fire metallization on zirconia ceramic is presented. The pressure signal can be read out wirelessly through the magnetic coupling between the reader antenna and the sensor due to that the sensor is equivalent to an inductive-capacitive (LC) resonance circuit which has a pressure-sensitive resonance frequency. Considering the excellent mechanical properties in high-temperature environment, multilayered zirconia ceramic tapes were used to fabricate the pressure-sensitive structure. Owing to its low resistivity, sliver paste was chosen to form the electrical circuit via post-fire metallization, thereby enhancing the quality factor compared to sensors fabricated by cofiring with a high-melting-point metal such as platinum, tungsten or manganese. The design, fabrication, and experiments are demonstrated and discussed in detail. Experimental results showed that the sensor can operate at 600 °C with quite good coupling. Furthermore, the average sensitivity is as high as 790 kHz/bar within the measurement range between 0 and 1 Bar.Keywords
This publication has 12 references indexed in Scilit:
- A Wireless Passive Pressure Microsensor Fabricated in HTCC MEMS Technology for Harsh EnvironmentsSensors, 2013
- A polycrystalline SiC-on-Si architecture for capacitive pressure sensing applications beyond 400 °C: Process development and device performanceJournal of Materials Research, 2012
- A Wireless Embedded Resonant Pressure Sensor Fabricated in the Standard LTCC TechnologyIEEE Sensors Journal, 2009
- Harsh Environment Silicon Carbide Sensors for Health and Performance Monitoring of Aerospace Systems: A ReviewIEEE Sensors Journal, 2009
- High temperature cyclic pressurization of titanium ducts for use in aircraft pneumatic systemsMaterials & Design (1980-2015), 2009
- Design of a small personal air monitor and its application in aircraftScience of The Total Environment, 2009
- Long-Term Stability of Metal Lines, Polysilicon Gauges, and Ohmic Contacts for Harsh-Environment Pressure SensorsIEEE Sensors Journal, 2006
- Capacitive pressure sensor in post-processing on LTCC substratesSensors and Actuators A: Physical, 2005
- A novel temperature-insensitive optical fiber pressure sensor for harsh environmentsIEEE Photonics Technology Letters, 2005
- Silicon compatible materials for harsh environment sensorsSensors and Actuators A: Physical, 1999