Flow Stress Curve Modification and Constitutive Model of 20CrMoA Steel during Warm Deformation
Open Access
Abstract
The warm deformation behavior of 20CrMoA steel at the temperature of 873–1123 K and the strain rate of 0.01−10 s−1 was investigated to obtain its processing property and optimum processing parameters. The true stress-true strain curves showed that flow stress reaches the peak rapidly, followed by slow decrease till reaching a steady state. This suggests a flow softening of dynamic recovery. The stress dropped with increasing deformation temperature and decreasing strain rate. The reduction became more distinct at lower temperature and higher strain rate due to flow softening caused by deformation heat. In the temperature range of 873–973 K, the deformation of 20CrMoA steel was more sensitive to temperature, and the average decline rate of steady stress was 6.9 times larger than that in the temperature range of 1023–1123 K. After modifying the stress curves, a constitutive model was developed for different deformation temperature ranges based on modified curves. The model was in good agreement with the experimental results.Keywords
Funding Information
- National Natural Science Foundation of China (51975301)
- Natural Science Foundation of Zhejiang Province (LZ17E050001)
This publication has 32 references indexed in Scilit:
- Microstructure control of ferrous driven part fabricated by warm precision forgingProcedia Manufacturing, 2018
- Structural developments in un-stabilized ultra low carbon steel during warm deformation and annealingMaterials Chemistry and Physics, 2016
- Numerical analysis and experimental validation on multi-stage warm forging process of deep groove ball bearing—a modified punch geometry with microstructure and defect analysisThe International Journal of Advanced Manufacturing Technology, 2016
- Formation of ultrafine grained ferrite by warm deformation of lath martensite in low-alloy steels with different carbon contentScripta Materialia, 2008
- Mechanism of ferrite grain refinement during warm deformation of a low carbon Nb-microalloyed steelMaterials Science and Engineering: A, 2007
- Influence of deformation temperature on the ferrite grain refinement in a low carbon Nb–Ti microalloyed steelJournal of Materials Processing Technology, 2006
- Development of microstructure and texture of medium carbon steel during heavy warm deformationActa Materialia, 2004
- Warm forging of aluminium alloys: a new approach for time compression of the forging sequenceInternational Journal of Machine Tools and Manufacture, 2000
- Recent developments on high precision forging of aluminum and steelJournal of Materials Processing Technology, 1997
- Modern metal forming technology for industrial productionJournal of Materials Processing Technology, 1997