Research on Energy Recovery of Superconducting Pulsed Power Supply
- 22 June 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 31 (8) , 1-5
Abstract
Superconductingpulsed power supplies have gained increasing popularity due to its advantages of high energy storage density, longenergy storage time, low loss and low power requirements for charging power sources. In order to realize the recovery of residual energy and improve the energy efficiency, a novel SPPS capable of energy recovery was proposed in our previous work. A capacitor branch is added to accelerate the change of inductor currents and promote the recovery of residual energy. The working principle and key parameters are analyzed in detail in this paper so as to further study the feasibility of the novel SPPS. The influence of the added capacitor value and the switch trigger delay time on the characteristics of the power supply is researched. As the capacitance decreases, the recovery of residual energy is accelerated and the recovered energy is slightly improved. But smaller capacitance increases the capacitor voltage. As the delay time increases, the capacitor voltage reduces but the recovered energy also decreases. The recovered energy in capacitor accelerates the discharging process of next cycle and increases the output current.Keywords
Funding Information
- Zhengzhou University of Light Industry (2020BSJJ056)
This publication has 8 references indexed in Scilit:
- An Improved Repetitive Inductive Pulsed Power Supply Circuit With ICCOS TechniqueIEEE Transactions on Plasma Science, 2020
- Asynchronous Discharge of an Eight-Module Superconducting Pulsed Power Supply for Driving an Electromagnetic RailgunIEEE Transactions on Applied Superconductivity, 2018
- A Repetitive Inductive Pulsed Power Supply Circuit Topology Based on HTSPPTIEEE Transactions on Plasma Science, 2017
- Review of Inductive Pulsed Power Generators for RailgunsIEEE Transactions on Plasma Science, 2017
- Review of the Meat Grinder Circuits for RailgunsIEEE Transactions on Plasma Science, 2017
- Design and Testing of a Novel Inductive Pulsed Power Supply Consisting of HTS Pulse Power Transformer and ZnO-Based Nonlinear ResistorIEEE Transactions on Plasma Science, 2013
- Design, Construction, and Testing of an Inductive Pulsed-Power Supply for a Small RailgunIEEE Transactions on Magnetics, 2006
- Asynchronous Generators For Fast, High-Energy Pulsed Discharge as Power Supplies for Electromagnetic1993