Design and Optimization of a Planar Omnidirectional Wireless Power Transfer System for Consumer Electronics
Open Access
- 31 January 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Power Electronics
- Vol. 5, 311-322
Abstract
Recently, omnidirectional wireless power transfer (WPT) has gained increasing popularity due to its capability to charge in arbitrary positions and directions. However, existing solutions still face several challenges, including coupled coils, non-optimized structure, non-uniform magnetic field, and poor misalignment tolerance. This work proposed an omnidirectional WPT system with three fully decoupled coils consisting of one square coil and two perpendicular DD coils. Comprehensive modeling and Pareto optimization for the transmitter coil structure are conducted for improved tolerance to both lateral and angular misalignment. Experimental results are provided to validate the system performance in terms of the output voltage and efficiency under different lateral and angular misalignments. With a 12 V input, the efficiency of the system exhibits a <10% variation, ranging from 69% to 78%, with 50mm misalignment in the x and y axes and a 90-degree angular misalignment. At the same time, the output voltage remains within the range of 11.5 V to 14.5 V.Keywords
This publication has 37 references indexed in Scilit:
- A Novel Asymmetrical Quadrupolar Coil for Interoperability of Unipolar, Bipolar, and Quadrupolar Coils in Electric Vehicle Wireless Charging SystemsIEEE Transactions on Industrial Electronics, 2023
- Low-Frequency Wireless Power Transfer Via Rotating Permanent MagnetsIEEE Transactions on Industrial Electronics, 2022
- Planar Omnidirectional Wireless Power Transfer System Based on Novel MetasurfaceIEEE Transactions on Electromagnetic Compatibility, 2021
- A Tripolar Plane-Type Transmitter for Three-Dimensional Omnidirectional Wireless Power TransferIEEE Transactions on Industry Applications, 2021
- Distributed Wireless Power Transfer System for Internet of Things DevicesIEEE Internet of Things Journal, 2018
- Simultaneous Wireless Information and Power Transfer (SWIPT): Recent Advances and Future ChallengesIEEE Communications Surveys & Tutorials, 2017
- Wireless Powered Sensor Networks for Internet of Things: Maximum Throughput and Optimal Power AllocationIEEE Internet of Things Journal, 2017
- Development of a Single-Sided Flux Magnetic Coupler for Electric Vehicle IPT Charging SystemsIEEE Transactions on Industrial Electronics, 2011
- Design and Optimization of Resonance-Based Efficient Wireless Power Delivery Systems for Biomedical ImplantsIEEE Transactions on Biomedical Circuits and Systems, 2010
- Analysis, Design, and Control of a Transcutaneous Power Regulator for Artificial HeartsIEEE Transactions on Biomedical Circuits and Systems, 2009