Positive Role of Fluorine Impurity in Recovered LiNi0.6Co0.2Mn0.2O2 Cathode Materials
- 19 November 2021
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 13 (48) , 57171-57181
Abstract
Lithium-ion battery (LIB) recycling is considered as an important component to enable industry sustainability. A massive number of LIBs in portable electronics, electric vehicles, and grid storage will eventually end up as wastes, leading to serious economic and environmental problems. Hence, tremendous efforts have been made to improve the hydrometallurgical recycling process because it is the most promising option for handling end-of-life LIBs owing to its wide applicability, low cost, and high productivity. Despite these advantages, some extra elements (Al, Fe, C, F, and so forth) remain as impurities in the removal process and are retained in the solution, which is a great challenge to obtain high-quality cathode materials. In this work, the impacts caused by fluorine impurity on the LiNi0.6Co0.2Mn0.2O2 (NCM622) cathode are intensively investigated via hydrometallurgical coprecipitation for the first time. Our results show that up to 1 at. % fluorine impurity brings a positive influence on the recovered material due to a higher Ni2+ ratio on the surface of cathode particles. In addition, the presence of fluoride ions during coprecipitation could lead to the formation of holes in cathode particles, which improves the rate capability and cyclability dramatically. Compared to the virgin material, the capacity of the NCM622 material with 0.2 at. % fluorine impurity is boosted by ∼8% (167.7 mA h/g) with a remarkable capacity retention of 98.0% after 100 cycles at 0.33 C. Besides, the cathode with 0.2 at. % fluorine impurity shows a far better rate performance, especially at high rates (∼7% increased at 5 C) than that of virgin. These results convince that a low concentration of fluorine impurity is desirable in the hydrometallurgical recycling process. More importantly, this study offers implications in the design of high-performance NCM622 cathode materials via coprecipitation production with ion doping in the near future.Keywords
Funding Information
- Office of Energy Efficiency and Renewable Energy
This publication has 47 references indexed in Scilit:
- A closed loop process for recycling spent lithium ion batteriesJournal of Power Sources, 2014
- LiNi1/3Co1/3Mn1/3O2 hollow nano-micro hierarchical microspheres with enhanced performances as cathodes for lithium-ion batteriesJournal of Materials Chemistry A, 2013
- A novel method to recycle mixed cathode materials for lithium ion batteriesGreen Chemistry, 2013
- Double-shelled hollow microspheres of LiMn2O4 for high-performance lithium ion batteriesJournal of Materials Chemistry, 2011
- Analysis of the Growth Mechanism of Coprecipitated Spherical and Dense Nickel, Manganese, and Cobalt-Containing Hydroxides in the Presence of Aqueous AmmoniaChemistry of Materials, 2009
- Electron Transfer Mechanisms upon Lithium Deintercalation from LiCoO2 to CoO2 Investigated by XPSChemistry of Materials, 2007
- Factors that affect Li mobility in layered lithium transition metal oxidesPhysical Review B, 2006
- R factors in Rietveld analysis: How good is good enough?Powder Diffraction, 2006
- Synthetic optimization of Li[Ni1/3Co1/3Mn1/3]O2 via co-precipitationElectrochimica Acta, 2004
- Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenidesActa Crystallographica Section A, 1976